Solid Density Meter Soild Densimeter Measuring Densitometer for Materials Like Rubber Plastic with RS-232 Interface of Maximum Weight 300g Density Resolution 0.001 g/cm3

Pay with

Solid Density Meter Soild Densimeter Measuring Features

• ◆ Densimeters Measuring Range: 0.001—99.999g/cm3;Fasting testing,more efficiency,can be applied in production site and laboratory. Density Resolution: 0.001 g/cm3; Function of automatic zero tracking,buzzer warning,and overload warning.

• ◆ Densimeters Maximum Weight: 300g; Adopt the completed professional windproof and dustproof cover,which makes the machine convenient and durable.

• ◆ Densimeters Minimum Weight: 0.005g; Adopt the completed high-capacity measurement accessories with the transparent injection moulding sink,which can resist wear,fall off,and corrosion.

• ◆ Standards: According to ASTM D792,GB/T1033,GB/T2951,JIS K6268,ISO 2781,ISO 1183, GB/T208, GB/T5163, GB/T 1933 standards etc.

• ◆ Densimeters is one of the densimeter that have been widely applying in industry,as the medium of water,the density value can be displayed after two steps.Compared with traditional densimeter,there is no calculation by hand,which is more convenient.
  

About Solid Density Meter Soild Densimeter Measuring

Application: Rubber,tire,macromolecule,composite materials, shoe materials, sealing,soft synthetic leather, convey Belt;plastic, plastic pellets, cable, packing materials, new materials researching laboratory., etc With completed injection moulding testing plat,and the high transparency water sink that built in imported PC.Testers can inspect the samples in water clearly.the suspension wire made up of 0.5mm stainless steel is perpendicular to nacelle,which would not touch the water sink,therefore accuracy of the test result can be ensured. DH-300 also can be applied to metal,powder,ceramics,fireproofing materials,magnetic materials,mechanical parts,mineral and rock,cement,precious metal,.,etc. Technical Specifications Mold: DH-300 Density Resolution: 0.001 g/cm3 Maximum Weight: 300g Minimum Weight: 0.005g Measuring Range: 0.001—99.999g/cm3 Standard Accessories: Host,Sink,Test board,Tweezer,Thermometer,,Windproof and dustproof cover,A set of measuring grain accessories,A set of measuring floating body accessories,Power Transformer Measurement Procedure: Place sample on test board to measure weight in air,and then press ENTER button to memory. Place the sample into water to measure weight in water,and then press the ENTER button to memory. Density value is displayed. Features: Plastic particle,film,floating,seal ring,rubber,calcium carbonate powder can get quick tested. Rubber DIN volume wear loss,Akron wear loss,expansion can be reading directly. Function of solution compensation.necessary if liquid other than water is used as a medium for measurement. Adopt the completed high-capacity measurement accessories with the transparent injection moulding sink,which can resist wear,fall off,and corrosion.Interface of RS-232C is included.