FAAC Photobeam Safety Eye XP 30 - Wall photocell Gate Opener

Pay with

FAAC Photobeam Safety Eye XP 30 - Wall photocell Features

• Maximum Distance: 100 ft. (30 m)

• Power Supply Voltage: 24V --------- Output Type: Relay - N.C./N.O.

• UL 325 Compliant When Used With FAAC Control Boards

• 4 Channel Relay Selection, Allowing Installation Of Up To 4 Separate Photocell Pairs

• Wall-Mounted Installation or Flush/Column-Mounted Installation With Adapter

About FAAC Photobeam Safety Eye XP 30 - Wall Photocell

The XP30 is the ideal solution for nealy any application and features a channel selection ability that, through the use of coded signals, makes it simple to avoid any interference caused by nearby use of separate transmitters and receivers, therefore making it possible to install up to 4 pairs of XP30 photocells close together with no need to allow a minimum distance between each pair or to "reverse" the TX and RX positions. In addition to the benefits of these coded signals (TX-RX) and to the channel selection, these photocells are protected against interference caused by external light sources (such as LED headlights). These photoeyes look great and perform even better, making them the ideal replacement for both wall and flush mounted Fotoswitch and Photobeams. Features: UL 325 Compliant When Used With FAAC Control Boards Plastic Body With Moulded Front Seal Cover And Closed-Cell Cable Routing Area Seal Protects Against Interference From External Light Sources 4 Channel Relay Selection, Allowing Installation Of Up To 4 Separate Photocell Pairs Wall-Mounted Installation or Flush/Column-Mounted Installation With Adapter Specifications: Maximum Distance: 100 ft. (30 m) Power Supply Voltage: 24V Absorbed Current: RX (30 mA), TX (20 mA) Contact Ratings: 60 VA / 24 W Alignment: Automatic Auto-Alignment Angle: 7º - 13.5º Output Type: Relay - N.C./N.O. Protection Class: IP54 Operating Temperatures: -4ºF ~ 131ºF Dimensions (LxHxD): 2.16" x 3" x 0.82"