X
Category:
Hardware
FAAC S418 Single Kit Electromechanical Swing Gate
FAAC S418 Single Kit Electromechanical Swing Gate

FAAC S418 Single Kit Electromechanical Swing Gate Operator

Product ID : 50252918


Galleon Product ID 50252918
UPC / ISBN 372769995089
Shipping Weight 0 lbs
I think this is wrong?
Model FAAC S418
Manufacturer LAO
Shipping Dimension 0 x 0 x 0 inches
I think this is wrong?
-
No price yet.
Price not yet available.

Pay with

FAAC S418 Single Kit Electromechanical Swing Gate Features

  • This electromechanical swing gate operator uses 24V technology which makes it safer due to lower voltages being required to run the operator.

  • It has a long stroke and new multi-position fixing brackets which gives the operator more flexibility making it easy to install in a wide variety of applications

  • Power supply - 24 Vdc

  • INCLUDED: arm, control board, and two battery

  • NOTE: no included photocell, remotes, and receiver


About FAAC S418 Single Kit Electromechanical Swing Gate

Model S418 Electromechanical Swing Gate Operator The FAAC S418 Electro-mechanical operator is designed for residential swing-leaf gates with single-leaf maximum length of 2.3m (2.7m with electric lock). Features: - Gates up to 500kg - No need for hard stops in the floor - This electromechanical swing gate operator uses 24V technology which makes it safer due to lower voltages being required to run the operator. - Due to less voltage being required, the heat of operation is lower; therefore the operator can run at a higher duty cycle. - There is a built in manual release device on the unit, and also an option of a battery backup, making the unit extremely reliable. - Self learning of the operation cycle, through simple push button set-up makes installation straight forward. - The unit contains integrated open and closing mechanical stops, which again saves time on installation and reduces costs. - It has FAAC’s patented “2 easy” Bus technology making it easier to wire in accessories such as photocells. - The operator is capable of moving a gate leaf up to 2.7m in length with lock, 2.3 no lock - It has a long stroke and new multi-position fixing brackets which gives the operator more flexibility making it easy to install in a wide variety of applications. - The unit has a locking gear mechanism that holds gates in both open and closed positions. - Adjustable Speed settings - Anti wind function Power supply - 24 Vdc Power - 35 W Current - 1,5 A Max. thrust** - 180 daN Rod stroke - 350 mm (390 mm without mechanical stops) Rod extension speed - 1.8 cm/s Leaf max. width - 2,7 m* Operating ambient temperature - -20° C ÷ +55° C Weight - 6 kg Dimensions (L x D x H) in mm - 825x104x125 Protection class - IP 54 Travel limit microswitches - NO Opening and closing mechanical stops - YES