SHANLING UP5 Headphone Amp/DAC Bluetooth5.0,Hi-Res Receiver,Portable Headphone Amplifier,Dual ES9219C dac,Support NFC|APP Ctrl|MQA 16X|384K/32Bit DSD256 for Phone/Nintendo Switch/PC/Car/Home Audio

Pay with

SHANLING UP5 Headphone Amp/DAC Bluetooth5.0,Hi-Res Features

• 【TOP of the Line Bluetooth Function】-- With Qualcomm's flagship QCC5120 Bluetooth chip,Shanling UP5 bluetooth amplifier supports Bluetooth 5.0, and supports full-format Bluetooth encoding protocols including LDAC/LHDC/aptx HD/aptx LL/aptx/AAC/SBC. The Bluetooth decoding and transmission are stable and accurate.

• 【OELD HD Display】-- Shanling UP5 is equipped with a 0.96-inch OLED display, made of double-curved tempered glass, and the information of the device's power/volume/encoding/gain/EQ/vehicle mode can be seen at a glance

• 【2.5mm/3.5mm/4.4mm Triple Output and Super Long Battery Life】-- Fully balanced output through 4.4mm or 2.5mm connectors, or single ended output on 3.5mm.100 hours long standby time, 11 hours balanced output, 15 hours single-ended output.

• 【High performance DAC】-- SHANLING UP5 Headphone Amp Matchs Super Strong Adjustable Dual-Core ESS ES9219C DAC Chip,In USB DAC mode and with an app supporting the MQA playback, up to MQA 16x rendering is supported.UP5 supports MQA playback only in UAC2.0 mode. UAC1.0 mode is simplified USB mode and is designed for use with devices sucha s gaming consoles, not iOS.

• 【Lossless Sound Quality and Balanced USB Output】-- The Shanling UP5 bluetooth amps relies on the XMOS XUF208 chip to USB Asynchronous audio decoding,support up to 384kHz/32bit, and native DSD256.

• 【HD Calls - Shanling UP5 built-in Sisonic high-quality audio microphone, equipped with new cVc8.0 call noise reduction technology and intelligent DSP system.

• 【Eddict Player APP Personalized Remote Control】-- Turn on your phone, and open the Eddict Player APP, you can easily remote control UP5. Not only supports fourteen operations such as Bluetooth format switching, channel EQ settings, volume fine-tuning, single and double DAC switching, but also direct OTA upgrade.In addition, UP5 also supports NFC function.

• 【Car Mode】--With a special Car mode for the automatic detection of charging, that will make UP5 into the perfect Bluetooth receiver for your car audio system.************Connect UP5 to AUX input(The AUX cable in car mode needs to be purchased separately, and the car needs to support AUX)

• 【Customer Service&Technical Support】-- Dear customer, you can contact Shanling if you have any questions, whether it is technical consultation or after-sales service, we will answer you 24 hours a day. And our products provide 1 year maintenance service, we will replace them unconditionally if there are any quality problems in the products.

About SHANLING UP5 Headphone Amp/DAC Bluetooth5.0,Hi-Res

Specifications： Bluetooth Codec Formats: LDAC, LHDC, aptX HD, aptX Low Latency, aptX, AAC, SBC Bluetooth Chip: Qualcomm QCC5120 DAC Chip: 2X ESS Sabre ES9219C USB Chip: Xmos XU208 Bluetooth Version: Bluetooth 5.0 Transmission Distance: 10m Microphone: Sisonic high quality microphone Output Power: 90mW@32Ω (single-ended, single-DAC mode) 112mW@32Ω (single-ended, dual DAC mode) 240mW@32Ω (balanced mode) Signal-to-noise ratio: 120dB (single-ended, balanced) Channel Separation: 70dB@32Ω (single-ended) 108dB@32Ω (balanced) THD+N: 0.0018% (LDAC/A-W/0.5V/32Ω) 0.0035% (Others/A-W/0.5V/32Ω) Battery Life: 15 hours (single-ended) 11 hours (equilibrium) Charging: 2 hours Battery Capacity: 680mAh Power Adapter: DC 5V/1A USB: Type-C interface, support UAC1.0 and UAC2.0 switching Volume adjustment: use the scroll wheel to independently adjust the volume of the phone Plug: 2.5mm/3.5mm/4.4mm, support car AUX Size: 68mm*39mm*14.5mm Weight 50g Accessories: high-quality PU leather case, Type-C decoding cable, manual Notice: *When the UP5 is connected to the mobile phone but not used for more than 2 minutes, it will enter the standby mode with low power consumption. Standby mode (100 hours) Tap the power button once to put the UP5 into working state. *Tested in the laboratory state (using SBC encoding format), the data will fluctuate due to the battery life, file type (the higher the specification, the shorter the battery life) and other factors. *The UP5 Bluetooth headset power amplifier will light up when charging, and the corresponding icon will be displayed on the screen when it is fully charged. *After connecting with the computer through the USB cable, it can automatically enter the USB-DAC mode. *Bluetooth signal may be affected by factors such as obstacles or WiFi wireless signals. *Please refer to the manual for detailed functions.