All Categories
Get it between 2024-06-07 to 2024-06-14. Additional 3 business days for provincial shipping.
[APPLICATION] The DMX512 wireless controller is ideal for stage lighting control. One transmitter can control many receivers. With tricolor LED displaying indicators, the wireless DMX512 can be used in all DMX lamps. Without wires, it's the perfect way to get rid of the trouble of winding wire. (Note: Only support the use of devices marked with DMX512)
[INDIVIDUAL WIRELESS NET] Donner wireless dmx transmitter receiver has 7 groups ID code settable. Users can use 7 groups of individual wireless nets without any interference with each other in the same place.
[HIGH EFFICIENCY] The wireless dmx controller with 126 Channels jumping frequency automatically, high anti-jamming ability to ensure works reliability. No time delay during data transmission. Communication distance: 500M (visible distance).
[WIRELESS CONTROL] DMX512 wireless receiver transmits standard DMX512 protocol data (generated by console) by wireless way.
[PACKAGE CONTENT] DMX512 Wireless Transmitter x 1, DMX512 Wireless Receiver x 7, Power Adapters x 8. (NOTE: Without built-in battery, need power adapter when it works.)
Specification:2.4G wireless DMX512 R/T 7 groups ID code settable, User can use 7 groups individual wireless net without any interfere. Input voltage: 5VDC 500mA MIN Communication distance: 400M (visible distance) Max transmitting power rate: 20dBm Receiver Sensitivity: -94dBm CPU: 32-bit ARM Core Modulation: GFSK DMX Signal Interface: RS485 Operating temperature: -40 ~ 85 °C,Storage Temperature: -65 ~ 150 °CAmbient Relative Humidity: 5 to 95% (non-condensing) Automatic Reboot Trigger: Built-in WDT (watchdog timer) Operating manual1. Press momentary switch above the side led indicator to indicate ID setting 2. Press again to set IC,to the color ID desired, adding 1 each time you press the switch will advance the color ID code. 3. Working condition: LED constant lit up:No DMX or wireless signal. Red LED flash:Transmitting Green LED flash:receiving 4. RF frequency 2.400 - 2.525G,total 126 channels,it's searching automatically, 5. ID Code "1-7" groups ID code,press 'KEY' for setting,it only can work under same ID code of transmitter and receiver. (Same LED Color) Establishing Communication: 1. Power on DMX512 wireless received board first and then following to power up the transmitted boards. 2. Press "Key" button to set same ID value of transmitted board and received board. Please use different ID value if you need use more than 1 group wireless universals at same time in same place. 3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flash till received corrected same ID value, LED flash more fast once DMX data more fast.Package included:1 x Black DMX512 Wireless Transmitter (US Plug) 7 x Black DMX512 Wireless Receiver (US Plug) 8 x Power adapter