All Categories
Installation Steps: 1. Take off the stock display covers (both the top and the bottom units). 2. Remove the screw at the bottom of the panel. 3. Inspect our display and make sure everything looks good after transit. 4. First, install the connector. Make sure pins are aligned correctly (2nd pin from the left on the board has to be untouched!). Insert the connector and install the screw you have removed in step 2. Press the blue button and make sure the screen lights up and works properly as per pictures. 5. Remove adhesive tape which came with our unit. Put on the new display panel and make sure it's fully inserted in place. Watch out for connector cables! 6. Insert button (remove tape again) and light extensions to your bottom panel cover. 7. Reapply the bottom panel cover you removed in step 1. Package Include: 1 * Circuit Board 1 * Screen Cover 1 * Screwdriver 1* Set of manual