We specialize in hard to find items
All Categories
Vavoger Upgrade Paintball Co2 Pressure Regulator Mini Sef Super Fast Refresh HPA Regulator Input 1500psi Output 0 to 130psi
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
Vavoger Upgrade Paintball Co2 Pressure Regulator Features
-
Material:Aluminium alloy,Brass, Stainless steel;Function:Mini Co2 regulator for paintball tanks.Inlet port:G1/2-14,Outlet port::1/8 NPT;Suitable gas: Co2 HPA
-
Adjustable outlet pressure:0-130psi;Pressure gauge range:0-230psi;Max.Working Pressure:1500PSI;Rupture Disc:1800PSI
-
How it works:1.Rotate the knob counterclockwise until the adjusting rod is completely;relaxed, and then gas can be introduced to close the regulator.
-
2. Then screw the regulator onto the HPA bottle;3. After installation, you can tighten the knob clockwise to adjust the required pressure.
-
4,If you find that there is air leakage at the connection between the male quick plug and the female quick plug during using this regulator, you need to shake the male quick plug to make them work normally.
-
5,The reason for the leakage of the female quick plug and the male quick plug is probably that the gasket inside the female quick plug has not been pushed to fully fit the top surface of the male quick plug. When we connect the male quick plug to the female quick plug, and as we increase the pressure and shake the male quick plug, so that the gasket inside the female quick plug can be completely matched with the male quick plug, and there will be no air leakage.
About Vavoger Upgrade Paintball Co2 Pressure Regulator
1.Rotate the knob counterclockwise until the adjusting rod is completely relaxed, and then gas can be introduced to close the regulator. 2,Then screw the regulator onto the HPA bottle. 3,After installation, you can tighten the knob clockwise to adjust the required pressure. 4,If you find that there is air leakage at the connection between the male quick plug and the female quick plug during using this regulator, you need to shake the male quick plug to make them work normally. 5,The reason for the leakage of the female quick plug and the male quick plug is probably that the gasket inside the female quick plug has not been pushed to fully fit the top surface of the male quick plug. When we connect the male quick plug to the female quick plug, and as we increase the pressure and shake the male quick plug, so that the gasket inside the female quick plug can be completely matched with the male quick plug, and there will be no air leakage.
