P&LED (12V,35W Color Changing Swimming Pool Lights Bulb LED PAR56 Light (Switch Control + Remote Control Type) for Pentair Hayward Light Fixture,and for Inground Pool,E27 Compatible with E26

Pay with

P&LED Features

• Read carefully the bullet point and the description before placing an order.This is the 12 voltage light,Not suitable for the 120V housing.Pay attention to the size of the light :Diameter:6.69",High:5.9".please check carefully the size of the fixture and make sure the diameter of your fixture is bigger than the light.

• Add new functions to the light:1:add memory function to the light.2:add temperature detect and automatic power down function,3: add DC 12v for the light. light is suitable for both AC12v but and DC12V. 4:add remote controller and light matching system.for more details please check the discription,

• This pool light bulb is able to lit up 25000 gallon pool,And as a bonus burns up a lot less electricity in the process.Works for most Pentair Hayward Light Fixture and Hayward Astrolite Series,you can not only simply flip the power switch on and off over and over in order to change the light color mode.but also use remote controller to change light modes. Please be noted,single red mode only 13 watt,not as bright as blue or other color.

• Diameter: 6.69"(169mm) and High:5.9"(128mm).Direct Replacement Screw Fitting Underwater Pool Light Bulb.Compatibility: Hayward Astrolite"SP058 Series,Pentair Amerlite 784,and so on.

• Attention:A one year warranty is provided with each bulb but does not cover the damage due to the wiring of a bulb to a system of different voltage,and water comming into the housing.

About P&LED

Attention if you buy several lights together,and want one remote controller to control several lights. please carefully check the video of the remote controller and light matching system,the link is below.please check it carefully New Version pool light first released on Amazon,Add 3 new technologies as below ★:Add remote controller and light matching system,you can avoid the other remote controller controlling your light by mistake. Video instruction is here: https://youtu.be/G9OmsV94Sok ★★:Add remote type pool light with memory function.we add a flash in the light,when you light up the light in certain mode for more than 30 seconds, the mode will be written into the flash, so when you turn on the light next time, it will be the last mode.other remote type pool light in amazon do not have the memory function.we are the first one. ★★★:Add temperature detect function for the light.some customer reflect that the light is easy to be burned out.some factory provide the Fan solution,in fact this is not scientifically.the light is installed in a sealed space.fans will not have good effection to the heat radiation.our solution is to add temperature detect function,when we detected the temperature is high than 80 degrees,the light will automatically down the power of the light. we tested in a sealed meta fixture,if you light up the white mode for than 4 hours, it will down the power.other color changing mode and single color mode produce much less heat than the white mode.it is a very intelligent idea to make the lifespan of the light as long as possible. Specifications: 1, Diameter: 169mm 2, Height:128mm 3, Base: E27 or E26 4, Body Material: Plastic 5, LED Type: SMD3014LEDs 6, Power:12V,35W