We specialize in hard to find items
All Categories
Dixon PL400L Aluminum Air Fitting, In-Line Lubricator, 3/4" NPT, 70 SCFM, 300PSI, 11 ozs Oil Capacity
Share Tweet
About Dixon PL400L Aluminum Air Fitting, In-Line
The minimum flow rate that must be achieved for the PL series lubricators to work is 30 SCFM. A flow rate less than 30 SCFM will not create the pressure difference needed between chambers to force the oil into the air stream. Can dispense standard air tool lubricant or Dixon anti-freeze lubricant. Lubricator body is 356-T6 aluminum. The lubricator has two reservoirs. The upper reservoir holds the oil and a lower reservoir that is the passageway for the air to enter. The air and oil mixture exits through the lower reservoir. The oil adjustment valve between the two compartments initially allows air to enter the reservoir to pressurize it, and then it controls the amount of oil entering the air stream. The simple principle behind the operation of this lubricator does not provide for oil shut off when the tool is not being used. To prevent a pressure differential from forcing the remaining oil from the reservoir into the air line, turn the lubricator upside down or open the fill plug to depressurize the reservoir. 300 psi Maximum pressure rating.
