UR0 RV Power Gear 14-1130 or 140-1130 Slide Out Relay Control Board Fleetwood 246063

Pay with

About UR0 RV Power Gear 14-1130 Or 140-1130 Slide Out

This is a replacement board for Power Gear Slide-Out Controller 14-1130 and 140-1130 The original Power Gear 14-1130 and 140-1130 are relay boards that have high power relays that route the power to the electric motors for your Power Gear Slide Out System. This is a drop in solution to the original Power Gear 14-1130 and 140-1130 If you have the older Power Gear 14-1098 board on your RV this won't be a drop in replacement. It's slightly larger (so you'll need to have new holes to screw it down) and you'll also have to do some changes to your stock wiring. If you do the changes this will function for your system just fine. If you don't want to change your wiring, stick with one of our other items (we have boards that match the OEM SPEC 14-1098 and also have upgraded 14-1098 boards in our other listings) If the Relay board you took out has the part number 14-1130 or 140-1130 than this board will drop in and you just need to move over your Thermal Circuit Breaker and Glass Fuse from your older board. The following instructions are provided as a general reference. Follow at your own risk! and we're not liable (or responsible) for any resulting consequences or damages to following these instructions!! 1. Disconnect the slide out system from the power supply. 2. Disconnect the wiring harness from the original board. 3. Remove the circuit breaker and glass fuse from the original board 4. Remove the old Power Gear 14-1130 (or 140-1130) Board. 5. Install the New Power Gear 14-1130 Replacement Board. 6. Put the circuit breaker and glass fuse you removed from your original 14-1130 (or 140-1130) board on this new Power Gear 14-1130 Replacement Board 7. Reattach the wiring harness to this new Power Gear 14-1130 Replacement Board 8. Reconnect the slide out system to the power supply.