All Categories
Specifications Model# GSHP-0313P Pad size (Inch) 3" x 13" Foam Pad thickness 3.0MM Volts 13.5 V DC Power 7.5 W Electric Current 0.55A Lead Wire Lengh 18'' Package Include: 3 Packs 3'' x 13'' Heater pad User's Tips: 1.Do not Stretch the pad. 2.Apply pipe elbow heater pads to smooth and clean surfaces. 3.Clean the surface of the pipe with isopropyl alcohol and let dry. 4.Peel back the paper from the adhesive, and then press firmly and smoothly over the intended placement area. 5.This Heater pad requires 13.5V DC to operate at maximum efficiency. 6.Please ensure the connection to the proper voltage and the proper"on/off" switch is used. 7.The connection must be fused with the correct amperage. 8.If two or more tank heater pads are to be used they must be connected parallel. 9. Pipe elbow heater pads are not thermostatically controlled. Pipe insulation may be used with model#GSHP-0313P. 10.Packing include 1pc 3"x13" Pipe Elbow heater pad.