We specialize in hard to find items
All Categories
PerfectPrime GA0030, Portable Formaldehyde (HCHO) / TVOC Gas Concentration Indicator Sensor Detector/Three Light Colors Alarm
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
PerfectPrime GA0030, Portable Formaldehyde Features
-
Portable Formaldehyde HCHO , TVOC Gas Concentration Detector with 3 Colors Light (Green/Yellow/Red) Alarm for Indoor home safety
-
Formaldehyde HCHO / TVOC Range : 0 ~ 9.999 mg/m3 ; Resolution : 0.001 mg/m3 ; Sensor Type : Semiconductor
-
Built in 360 degree detector ports on top of the meter , LCD Display HCHO / TVOC Data with Blue Color Back lighting
-
Ease to Use and Calibration Enable with precise air quality monitoring.
-
2 x 1.5 V , AA Battery
About PerfectPrime GA0030, Portable Formaldehyde
Standard value of formaldehyde concentration: ? 0.1 mg / m3.(Refer to GB/T 18883-2002) Formaldehyde detector has high power consumption due to guarantee the detection accuracy and sensitivity, the program needs to process a lot of complicated operations, which costs much usage of electricity. Turn off the power when detection ends to avoid waste of electricity Usage i) 1~3 locations should be detected when the area is less than 50 m2; 3~5 locations should be detected when the area is between 50 m2~100 m2; at least 5 locations should be detected when the area is larger than 100 m2. All the detection locations should be distributed on the diagonal or in quincunx form. ii) detection locations should be kept away from air vent, and at least 0.5 m far away from walls. iii) height of detection locations is comparable to breathe height of human, relatively between 0.5~1.5 m Note: 1. The sensor of the detector may be affected by external disturbance just like all the other high precision apparatuses, so contact with ethanol, perfume or gas like H2S, CO, SO2 and smoke should be avoided. 2. When the detector is working, avoid straight wind flow from electric fans, warm air blower, air conditioner or air cleaner. 3.The average concentration of the targeted gas in a room can be obtained by detecting at several locations of the room and then averaging the data. 4. Don’t contaminate or block the detection window, otherwise sensitivity of the sensor may deviate.
