All Categories
[Sensing method] Distance-setting [Sensing distance] 20 mm to 200 mm [Setting range] 40 to 200mm [Differential distance] 10% Max. of setting distance [Reflectivity characteristic (black-white error)] 10% Max. of setting distance [Light source] Red LED (Emission wave length: 680nm) [Power supply voltage] 12 to 24 VDC -10% to 10% (ripple(p-p) :10% Max.) [Current consumption] 30mA DC Max. [Control output]Output type: NPN open collector output Load current: 0 to 100 mA Residual voltage: (DC) 1 V Max. (Load current 100mA Max.) [Operation mode] Light-ON/Dark-ON selectable [Load power supply voltage] 26.4 VDC Max. [Protective circuit] Surge suppressor Output short-circuit protection Power supply reverse polarity protection Mutual interference prevention [Response time] 1ms Max. [Sensitivity setting] 5-turn endless adjustment [Insulation resistance] 20 M OHM Min. at 500 VDC between charged parts and the case [Dielectric strength] 1000 VAC at 50/60 Hz for 1 minute between charged parts and the case [Degree of protection] IEC60529: IP67 [Applicable standard (EC Directive (Low Voltage Directive))] EN60947-5-2 [Applicable standard (EC Directive (EMC))] EMI: EN60947-5-2 Emission Enclosure: EN55011 Group 1 class A EMS: EN60947-5-2 Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Burst: IEC61000-4-4 [Conformed standard (EC Directive (CE marking))] Equipped [Connection method] Pre-wired models (Cable length: 2 m) [Indicator] Operation indicator(orange), Stability indicator(green) [Weight (packed state)] Approx. 65 g [Tightening torque] 0.5 N.mMax. (with M3 screw) [Accessories] Instruction manual (1)