allsun AC/DC Current Mini Clamp Meter Probe Tester Handheld Digital Electrical Clamp Multimeter CAT III Max.Input 400A/600V 50Hz-60Hz LED

Pay with

allsun AC/DC Current Mini Clamp Meter Probe Tester Features

• 〖Quick and Accurate AC/DC Amp Clamp Meter〗 is based on Hall Effect technology and is designed to be used in conjunction with multimeter for ac and dc current measurements.

• 〖Max. Jaw Opening〗The Digitl Clamp Meter measures the AC current in a conductor up to 33mm without interrupting the circuit, Max. Conductor Size: ∅ 28mm.

• 〖Power/Low Voltage Indication〗When the battery's voltage is enough, the LED lights green. When the battery's voltage is less than about 7.5V, the LED lights red indicating that the battery is not high enough and should be replaced immediately.

• 〖Multifunctional & Easy to use〗Range Switch, Used to turn on/ off the Current Probe as well as to select the desired,range, ZERO Button, AC/DC Button, AC/DC Button.

• 〖Handheld Electrical Tester〗AC/DC Current Probe Digital Clamp Multimeter, it's suitable for the electrical repair,quality assurance

About Allsun AC/DC Current Mini Clamp Meter Probe Tester

Introduction The AC/DC Current Probe is based on Hall Effect technology and is designed to be used in conjunction with multimeter for ac and dc current measurements. Electrical Specifications Max. Measurable Current: 400A Max. Overload Capability: 600A DC/AC rms Max. Working Voltage: 600V AC rms, CAT III Output Sensitivity: 40A range: 10mV/A 400A range: 1mV/A Output Voltage: DC 0 ~ ±400mV Output Impedance: 2 ~ 3k Zero Point Error: 0.0 ± 0.2mV for all ranges when there is no current being measured ( Note: Before dc current measurement, press and hold down the ZERO button for several seconds for zeroing.) Accuracy Specification: Accuracy is specified for a period of 1 year after calibration and at 25°C ± 1°C, with relative humidity up to 75%. Accuracy is specified from 5% to 100% of range.