All Categories
Functions Measuring AC leakage current and AC current of three channel, monitoring current in real-time manner, locating insulation faults and repairing electrical lines.Power source DC6V, alkaline battery LR03 1.5V×4Testing Method Split core type CT, true RMSRange 0.01mA-20AResolution 0.01mAAccuracy ±2%±5dgtClamp size 25mm×30mmInstrument Dimension Tester(L×W×H): 75mm ×170mm ×30mm Current clamp(L×W×H): 115mm ×70mm ×33mmMass Tester: 720g Current clamp: 170g × 3 PCSLCD Dimension Display field: 44mm×27mmShield Type Type B: Double shieldingSampling Rate 2 samples/sData storage 3900 sets (data loss does not occur after power failure or replacing the battery)Time Setting Recording internal adjustable from 1 to 60 min, If set to 0 min, the auto-store function is turned offRecording Time Continuously operate for about 10 days at the power-saving modeLine Voltage Line with a voltage up to AC600VOverflow Display The "OL" symbol is displayed when a measured value is beyond the measurement rangeBattery. Voltage A Low-Battery symbol is displayed and the user should replace the battery with a new one when the battery voltage drops to 4.6V to 4.8V. In this case, the measured values are still accurate. Rated Power about 5mA at the power-saving mode, maximum current consumption: 20mALead Length 2 mTemperature and Humidity Working: -20℃~50℃;below 80%rh Storage: -20℃~50℃;below 70%rh Insulation Resistance Higher than 100MΩ, 1000V Safety Codes IEC1010-1, IEC1010-2-032, Pollution Class 2, CAT Ⅲ(600V), IEC61326(EMC standard) Accessories Tester: 1 PCS, Current clamp: 3PCS, Instrument bag: 1 PCS, RS232 Com-cable:1 PCS; Software Disk: 1 PCS