Dig dog bone Wireless High Voltage Current Transformer Ratio Tester Meter ETCR9300B
Product ID : 33656597
Galleon Product ID
Dig Dog Bone
Dig Dog Bone
Product is Out of Stock as
of Mar, 27 2020
ETCR008 Sharp-nose Pliers Current Sensor is used for measurement of AC current, leakage current, high order harmonic current, phase, power energy, power, power factor.
It is portable, sharp-nose, no need to disconnect the measured circuits, non-contact, safe and fast.
Suitable for narrow and line densely places, can be connected with phase detection analyzer, industrial control equipment, data recorder, oscilloscope, harmonic analyzer, electric power quality analyzer, high precision digital multi-meter, etc.
Widely applied in electricity, communication, meteorology, railway, oilfield, construction, measurement, scientific and research teaching unit, industrial and mining enterprises.
*Function Measurement of current,transformation ratio, ratio difference, angle difference, phase, polar of primary/secondary circuit of low voltage current transformation. *Power Supply DC6V alkaline dry battery (1.5V AAA×4) *Test Mode Clamp CT *Display Mode LCD: 128dots×64dots; Blue screen, backlight, suitable for dark places *LCD Size Display area: 44mm×27mm *Dimension Width × Height× Thickness: Main tester: 75mm×170mm×30mm Primary current clamp: 40×138×20mm Secondary current clamp: 115×70×33mm *Clamp Size Primary current clamp: 80×80mm; Secondary current clamp: 25×30mm *Measurement Range Primary current clamp: 0.00mA-1000A; Secondary current clamp: 0.00mA-10A *Resolution Primary current clamp: 0.01mA; Secondary current clamp: 0.01mA *Transformation Ratio 1:10 million (1.0K7) *Measuring Accuracy of the Primary Circuit ±1%±3dgt (23C±3C, below 80%RH) *Measuring Accuracy of the Secondary Circuit ±0.5%±3dgt (23C±3C, below 70%RH) *Sample Rate 2 times/second *Gear Shift Automatic shift *Data Storage 3000 sets, press HOLD key, the data will be stored automatically with serial numbers (The data won't be lost in case of lost power or replace battery) *Circuit Voltage Below AC 600V *Data Hold Press HOLD key, HOLD symbol appears, press HOLD again to cancel. *Data Read Press HOLDkey and POWER key to access data reading. *Overflow Display "OL A" symbol appears *Automatic Power Off Automatically power off about 15 minutes after power on to reduce battery consumption *Battery Voltage Low battery symbol appears to remind the replacement of battery when the battery voltage drops below 4.8V. *Weight 1200g