LucaSng Dent Repair Kit Set,DIY Painless Dent Puller Removal Repair for Auto Body Motorcycle -51 PCS

Pay with

About LucaSng Dent Repair Kit Set,DIY Painless Dent

Name: Paintless Dent Repair Tools Set (51 PCS )Package:1 x Dent Lifter;1 x Car Hot Gun;1 x Silver PDR Bridge Dent Puller;1 x Dent Hammer;1 x Alcohol Bottle;1 x English Manual;2 x Plastic shovel;5 x pulling tabs(Suction Tab for Bridge); 5 x Yellow Glue Stick;5 x Black Glue Stick;10 x Red Suction Tab;18 x Blue Suction Tab;User Instructions for DIY Paintless Dent Removal Tool Kit1.Locate the dent, clean dent surface; 2.Detect the shape and size of the dent, use a mark pen to mark the dent surface and choose a suitable glue tab;3.Preheat the stick with glue gun to fully melted,about 3-5mins;4.Pull the trigger of glue gun and apply the glue tab evenly with extruded glue; 5.Immediately place the glue tab in the center of the dent and hold it about 3-5mins, then connect the tab with dent lifter, tighten the handle gradually and slowly till the dent surface flatten or slightly bulged; 6.Spray alcohol to adhesive area and clean the residual glues with a rubber Shovel;7.You also can use PDR Bridge Dent Puller for repairing -simply choose a pulling tab and glue it to the center of the dent,then place bridge over dent pulling tab,twist turning knob until it pops the dent out; 8.For a small dent, knock its surrounding area slightly with the dent hammer in order to smooth the surface, this process help you easy deal with small dent;Notes:1.If the PDR process are not successful or not obvious the first time, please repeat the above steps gently and patiently;2.If there is still salient point after above process, please press it with your thumb gently and repeatedly;3.If dent lies on Bonnet, don't charge the Hot Gun with Cigar lighter , because car heat up will influence repair effect; 5.Don't do the PDR process in the blazing sun, the high temperature of car will influence repair effect.