EVAP Smoke Machine, AUTOOL SDT-106 Automotive EVAP Leaks Testing Machine, Fuel Leak Detectors 12V Car Leak Locator Tester for All Vehicles

Pay with

About EVAP Smoke Machine, AUTOOL SDT-106 Automotive EVAP

HOW TO USE: 1.Open the engine cover, and hang the detector in the cover. 2.Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle.Please secure the other side with a rubber stopple. 3.Secure this side with proper taper stopple/pipe, and connect it with smoke output tube. 4.Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way. 5.Turn on the power switch, and detector starts to work. 6.In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary. 7.After leak detection, please connect well the wires and pipe. Packing List : 1pc * AUTOOL SDT106 Car Smoke Leak Detector Main Unit 1set * Hard Rubber Hose Plug (with serial specification) 1pc * Test Oil Refill Bottle(oil not included) 1pc * Hook (with hand-tighten nuts) 1pc * Rubber Connect Parts 1pc * Standard Cone Adapter 1pc * Power Cord Clamp 1pc * Valve Core Wrench 1pc * EVAP Special Connector 1pc * Smoke Hose 1pc * User Manual MAINTENANCE With longtime high temperature, the smoke and oil will oxidize and deteriorate. It will infect the service life of smoke generated part, so please change smoke and oil regularly. 1.Before filling new oil, please pour out the remaining oil in the detector. 2.When the smoke output has water drops, please replace with new oil. 3.Liquid paraffin and baby oil are OK. 4.Please fill new oil with equipped oil bottle NOTES Please do leak detection away from smoke-sensitive parts. It can suitable for EVAP. Do not run the detector over 5 minutes. It needs interval rest. The detector has protector. If it exceeds working limit, it will power off automatic