✅[Advanced firmware] Ortur laser master firmware, smarter, faster, more accurate and easier to use. Professional motherboard with 32-bit MCU. It can preprocess 32 instructions, support up to 921600 baud rate, more powerful! The engraving speed can be as high as 3000 mm/min. (If the laser engraving result is not considered, the moving speed can be as high as 1000MM/S)
✅[Excellent safety protection] 1. There is a G sensor on the main board, if the machine detects unauthorized movement, the laser beam will stop. 2. If your computer system stops or the USB cable is disconnected, causing the laser engraver to stop moving, the laser beam will stop to prevent fire. 3. If the laser engraving machine is under control, but the user forgets to operate and keep the laser beam working, if the motor stops moving, it will cut off additional safety to prevent fire.
✅[Perfect compatible system] Use LaserGRBL or LightBurn (this is the most popular paid engraving software in the world, very easy to use). Supports Windows XP, 7, 8, 10, Mac OS and Linux.
✅[Achieving precise engraving] The laser power range can be S0-S1000. Compared with only S0-S255, Ortur Laser Master can control the laser beam more accurately, and can even "draw" a photo on paper with a high-power laser unit. The 8-bit high-power laser engraving machine cannot do it.
✅[Quality and Assurance] We are the manufacturer of ORTUR. We only provide Amazon customers with the best quality and comprehensive pre-sales and after-sales services. The engraving machine enjoys a one-year warranty. If the engraving machine fails during the warranty period, please contact us.
ORTUR Laser Master 2
👇For more information, please visit the link below👇
【Laser module power】
【Laser wavelength description】
Laser Reaching Range: 445 ± 5nm
When the laser engraver is working, the operator should not leave it alone, just in case the materials being carved catch fire.
Do NOT operate laser without eye protection (Laser goggles).
Please set up laser engraver in the fireproofing area, with good ventilation.
Please keep minors (especially kids younger than 14 yours old) away from this laser engraver. Minors of any age should not use this laser without direct Adult supervision and proper eye protection
Please avoid strongly impact on the machine.
Please do not touch the laser beam with your hands or any other objects you do not wish to engrave/burn/cut. Serious physical harm is possible if used improperly.
Please do not touch the heat sink, when the laser engraver just stop working, it may scald your hands.
Use the laser engraver in a room that can be closed by a door and ensure that neither laser beams nor stray light can penetrate through the windows.
While using the laser engraver, use door signs or a warning light on the door that indicates the laser engraver is in operation.