Dayton Audio DAEX19QLP-4 Quad Feet Low Profile 19mm Exciter 5W 4 Ohm

Pay with

Dayton Audio DAEX19QLP-4 Quad Feet Low Profile 19mm Features

• Rare-earth neodymium motor and a proprietary vented voice coil

• 4 ohm impedance for use with small, Class D amplifiers

• Four arms provide extra support improving linearity

• Turns any flat, rigid surface into a speaker

About Dayton Audio DAEX19QLP-4 Quad Feet Low Profile 19mm

Quick Overview Turn almost anything with a flat surface into a speaker. The Dayton Audio DAEX19QLP-4 4 ohm sound exciter improves power handling with a vented voice coil. Product Highlights Rare-earth neodymium motor and a proprietary vented voice coil 4 ohms impedance for use with small, Class D amplifiers Four arms provide extra support improving linearity Turns any flat, rigid surface into a speaker Product Manuals / Spec Sheets / Downloads Dayton Audio DAEX19QLP-4 Specification Sheet AddThis Sharing Buttons Share to FacebookFacebook Share to TwitterTwitter Share to MoreAddThis Product Description Dayton Audios DAEX19QLP-4 quad arm exciter is built with four arms that extend out from the main exciter body, which allows this exciter to transfer sound to a much larger surface for lower frequency response extension (more bass). Also, the arms help to support the magnet/voice coil improving linearity when mounted on horizontal surfaces. A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 0.75" voice coil allows for more input power, creating rich, dynamic sound. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied to the main body, and the four arms ... just peel and stick! Note: An exciters frequency response and sensitivity are completely dependent on the exciters designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. To understand more about exciter technology, here is a link to the Exciters Buyers Guide . Product Details Speaker Series Exciters Model Number DAEX19QLP-4 List Price $7.99 Color Black Unit of Measure Each UPC 848791001765 Warranty - Parts 5 Years Warranty - Labor 5 Years Product Shipping Weight (lbs.) 0.1 Speaker Type Exciter Power Handling (RMS) 5 watts Power Handling (max) -- Continuous Program Power -- Impedance 4 ohms Sensitivity -- Frequency Response -- Voice Coil Diameter 19 mm Magnet Weight -- DC Resistance (Re) 3.5 ohms Voice Coil Inductance (Le) 0.13 mH @ 1 kHz Resonant Frequency (Fs) 450 Hz Mechanical Q (Qms) -- Electromagnetic Q (Qes) -- Total Q (Qts) -- Diaphragm Mass Inc. Airload (Mms) -- Moving Mass Of Diaphragm (Mmd) -- Mechanical Compliance of Suspension (Cms) -- Surface Area Of Cone (Sd) -- Volume of Displacement (Vd) -- BL Product (BL) -- Compliance Equivalent Volume (Vas) -- Maximum Linear Excursion (Xmax) -- Drivers Mechanical Losses (Rms) -- Entry / Exit Diameter -- Surround Material -- Voice Coil Wire Material -- Voice Coil Former -- Basket/Frame Material -- Magnet Material -- Overall Outside Diameter 57 mm dia. Overall Depth 12 mm H Baffle Cutout Diameter -- Mounting Hole Diameter -- Bolt Circle Diameter -- Product Weight --