Parker MB Series Stainless Steel 316 Ball Valve, Inline, 3/8" A-Lok Compression Fitting

Pay with

Parker MB Series Stainless Steel 316 Ball Features

• Stainless steel 316 for higher strength and greater corrosion resistance than stainless steel 304

• Lever handle for manual on/off control

• PFA seat and packing design for tight sealing

• Maximum pressure rating of 3000 psig for CWP; working temperature range of -60 to 300 degrees Fahrenheit

• A-Lok compression ends for a leak-proof connection

About Parker MB Series Stainless Steel 316 Ball

The Parker MB series stainless steel 316 unibody inline ball valve has a lever handle and A-Lok compression connections on both ends. This valve body is made of stainless steel 316 for higher strength and greater corrosion resistance than stainless steel 304. Stainless steel 316 is sometimes called "marine-grade stainless steel" due to its resistance to chloride corrosion. This valve has a lever handle for manual on/off control and indicates flow direction. One-piece perfluoroalkoxy (PFA) seat and packing design provides tight sealing. With the Parker A-Lok design, the front and back ferrules secure the tubes within the fitting, creating a leak-proof connection without the need for additional joining preparations. The maximum pressure rating is 3000 pounds per square inch (gauge) (psig) for cold working pressure (CWP), and the working temperature range is -60 to 300 degrees Fahrenheit. This valve meets American Society for Testing and Materials (ASTM) 276 standards for quality assurance.Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter of the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and is reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball's position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems. The company, founded in 1918 and headquartered in Cleveland, OH, provides fluid handling, filtration, sealing and shielding, climate control, process control, and aerospace technologies.