Manual Coil Winding Machine Dual-purpose Winding Machine Winder 0-99999 W/Counter

Pay with

Manual Coil Winding Machine Dual-purpose Winding Features

• [High quality] Cast iron frame, steel gears, winding is very easy, and the counting is accurate, the casting is firm.

• [Counter]The dual-purpose coil winding machine has a counter, which is easy to read when determining the number of loops on the coil. It can count up to 99999 times.

• [Specifications] The spindle diameter is about 8.5mm, and the thread size is M10x1.5. The maximum winding diameter is 150 mm (59 inches), and the maximum winding width is 100 mm (39 inches). Cover wire diameter: 0.02-2.6mm

• [Use] The winding machine is used to produce tightly and evenly wound coils. Hand-held winding machines are very suitable for household electronic projects, products that are usually sold in the form of coils in commercial packaging.

• [Operation] When winding manually, the winding machine can be controlled by the hand crank on the right side of the machine. The motor winding enables the machine to automatically wind the machine into uniform layers with uniform tension.

About Manual Coil Winding Machine Dual-purpose Winding

description: Material: cast iron frame, steel gear Maximum diameter: 150mm Maximum width: 100 mm Winding wire diameter: 0.02-2.6mm Counting range: 0-99999 Gear ratio: 1:8, 1:1 Dimensions (length x width x height): 9.7x9x18cm Maximum width: 28 cm Delivery content: 1 x coil counting and winding machine requires attention: 1. The machine should be fixed on the stage. The front panel of the stage is made of wood. There are three holes at the bottom of the machine for fixing between the machine and the workbench. 2. When in use, use the left hand to pull (the counter is reset to the reset handle reset request pull twice), all the counter Us (or gear rotation speed) in the reset state is not allowed, it can start to run, and it can be stopped after zero, in the process of running It is strictly prohibited to set it to zero.