WEN 4206T 2.3-Amp 8-Inch 5-Speed Cast Iron Benchtop Drill Press & 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base

Pay with

WEN 4206T 2.3-Amp 8-Inch 5-Speed Cast Iron Benchtop Features

• Product 1: Features a 2.3A induction motor, an 8-inch swing, and a 2-inch spindle travel

• Product 1: Includes a 1/2-inch keyed chuck and onboard key storage

• Product 1: Operates at 5 different speeds: 750, 1100, 1500, 2100, or 3200 RPM

• Product 1: 6.5 by 6.5 inch height adjustable worktable bevels up to 45 degrees in each direction

• Product 2: Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc

• Product 2: Belt tilts anywhere from 0 to 90 degrees

• Product 2: Sturdy cast iron base prevents any heavy vibrations

• Product 2: 4.3 Amp motor provides up to 3600 RPM

About WEN 4206T 2.3-Amp 8-Inch 5-Speed Cast Iron Benchtop

WEN 4206T 2.3-Amp 8-Inch 5-Speed Cast Iron Benchtop Drill Press Remember when you could drill with maximum accuracy? Power through metal, wood, plastics, and more with the WEN 8-Inch 5-Speed Drill Press. Don’t let our compact design fool you. Between the five operating speeds, the two-inch spindle travel, and the sturdy construction, you’ll have way more precision than a standard handheld drill. Our 2.3-amp induction motor features ball bearings for smooth balanced performance even at high speed. Manually set your speed to either 750, 1100, 1500, 2100, or 3200 RPM by adjusting the belt position on the two spindles. The easy-to-read, locking depth stop allows for accurate and repeatable drilling operations. The keyed chuck with JT33 spindle taper accepts bits ranging from 1/20 to 1/2 inch in diameter (1.5 to 13 mm). The table bevels 45° left and right for angled drilling. The base is designed with holes for mounting onto a bench or work stand. Clamps and vises are easily mounted to the slotted table, making work-holding safe and effective. And because its a WEN product, your drill press comes backed by a two-year warranty, a stocked inventory of replacement parts, and a helpful customer phone line. Remember when you could drill holes in almost anything? Remember WEN. WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you’ll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.