Double Inlet Forward Curve Belt Blower with Motor and Drive Package, 10-1/4" Wheel Dia, Unassembled

Pay with

About Double Inlet Forward Curve Belt Blower With Motor

This forward curve belt-drive blower is prelubricated, has sealed ball bearings with rubber isolators and a dynamically balanced forward curved wheel. It features a precision-ground shafting with both keyways and flats for a wide range of drives and HP, and also has die-stamped steel housing with mounting supports. A variable-pitch motor sheave is provided when ordered, complete with drive package for speed adjustment.Specifications:Item: Blower with Motor and Drive PackageType: Double Inlet Forward CurveDrive Type: BeltWheel Dia.: 10-1/4"Wheel Width (In.): 6-3/4CFM Range: 1780 to 1690 @ 0.625-In SP to 0.750-In SPCFM @ 0.125-In. SP: #CFM @ 0.250-In. SP: #CFM @ 0.375-In. SP: #CFM @ 0.500-In. SP: #CFM @ 0.625-In. SP: 1780CFM @ 0.750-In. SP: 1690Max. Inlet Temp. (Deg. F): 150Max. Ambient Temp. (F): 104Voltage: 115/230Hz: 60Phase: 1Full Load Amps: 11.0/5.5Motor RPM: 1725Motor HP: 3/4Bearing Type: BallMotor Type: Capacitor-StartMotor Enclosure: TEFCBlower RPM: 1182Housing Height (In.): 14-3/16Housing Width (In.): 9-3/16Housing Depth (In.): 12-1/2Discharge Height: 6-5/16"Discharge Width: 9-3/16"Mounting: MultipositionHousing Material: SteelHousing Finish: GraySpeed Controllable: NoAssembled/Unassembled: UnassembledIncludes: Motor Mounting Bracket, Isolation Grommets and Mounting HardwareFootnotes: # Motor Overload Condition