Plug N' Plate Acid Copper Kit

Pay with

About Plug N' Plate Acid Copper Kit

Plug N' Plate is a new concept in plating small parts. Our unique mains power pack supplies just the right amount of power allowing you to brush, and in some situations, dip plate your smaller components. The Plug N' Plate system will also allow you to patch repair areas where the original plating has worn away. Plug N' Plate is ideal for vintage vehicle restorers, antique collectors and dealers, and small workshops doing prototype work. What could be simpler? The Plug N' Plate wand is attached to the red plug on the Power Pack, and the alligator clip is attached to the work-piece. The end of the wand is covered in an absorbent bandage, which is soaked in the plating solution for a few seconds. By simply stroking the part with swift brush strokes, the circuit is closed and the plating metal bearing solution goes to work, depositing its beautiful layer onto the object. Plug N' Plate is perfect for gold plating car emblems. Simply strip the chrome off with Chrome Stripper, then apply the gold. Full instructions are included. Plug N' Plate may be applied onto most metals. To see which kit plates onto which metal, read our instruction booklet. To plate onto Stainless Steel, use the Plug N' Plate Copper system. When gold plating onto stainless, apply our Stainless Steel Activator For Gold with a stainless wand and 4.5V power pack, then you may gold plate directly onto the stainless part. We do not recommend plating aluminum directly with our Plug N' Plate kits. Use our Flash Copper Kit with zincate primer first, then you may Plug N' Plate onto the copper. To plate plastic, or other non-conductive parts, spray with Conductive Paint, dip in Tinning Solution, then plate with acid copper.