All Categories
Get it between 2025-08-27 to 2025-09-03. Additional 3 business days for provincial shipping.
【Automatically Pop Up Outlet 】:Easy to use, Push down on the top then it pops up; when finished, just need push it down with the palm of your hand; When retracted it seem completely flush with your counter top, make your kitchen looks exquisite !
【Wireless Charge Station 】:5 W Wireless charger,compatible with all devices which apply with Qi standard; 5V 2.1A USB output, it can be intelligent distribution to two ports to support device.
【Electric Power】: The Unit with a 125V ~ 250V Plug, 5.3 FT Power Cable; can plug in and use to an existing outlet ! Perfect for kitchen counters, office, conference room. But it cannot support high-power appliances, unable to support ultra-high power electrical equipment, like air conditioning, microwave.
【Easy to Install】: Cut a 4" hole in the countertop , remove the locking ring from the power socket, insert the socket into the hole, and tighten the locking ring from the bottom, the pop up length is 8.7", the underneath need space: 14".
【Use Notice 】:(1)The socket is not waterproof pop up outlet, the top of the socket can waterproof splash, but the inside of power socket is non-waterproof, please protect outlet from water spray (2) Before using, please keep the power cord on the bottom of the socket straight. (If the power cord at the bottom of the socket is stuck, it will cause the pop up cannot stay down)
Surge Protector Power Strip Bulit in 3 AC Outles and Dual USB Port Pop up Outlets with Wireless Charger for Kitchen Counters Conference Room Product Detail: Hight: 15 IN (38cm) Diameter:4 IN (10cm) Weight: 4 Pound(1.8KG) Current: 10-13 A Voltage: 125V ~ 250V Power rating: 1000W Power Cord length: 5.3 ft (160cm) 16 AGW Wireless charger compatible with all devices which apply with Qi standard, please make sure your mobile phone model with wireless charging function. How to Install: 1. Make sure there have 16" space before you cut a hole for it. 2. Use 4 inch hold saw to cut a hold size about 4". 3. Remove the ring from device and slide the body from top. 4. Slide the ring up from bottom and screw it tight. 5. Connect power cord with power source. Use Direction: 1.When you need to use it, use your palm to push the surface, and pop up socket will raise up automatically. When you don't need to use any electronics, you can just push it back. 2. When using, please keep the power cord on the bottom of the socket straight.(If the power cord at the bottom of the socket is stuck, it will cause the pop up cannot stay down) 3. Please note this power strips cannot support high-power appliances, unable to support ultra-high power electrical equipment, like air conditioning, microwave. 4. This power station is not waterproof pop up outlet, the top of the socket can waterproof splash, but the inside of power socket is non-waterproof, please protect outlet from water spray.