X
Dayton Audio DAEX25X4-4 Bullfrog Vented Disc Spider
Dayton Audio DAEX25X4-4 Bullfrog Vented Disc Spider
Dayton Audio DAEX25X4-4 Bullfrog Vented Disc Spider
Dayton Audio DAEX25X4-4 Bullfrog Vented Disc Spider

Dayton Audio DAEX25X4-4 Bullfrog Vented Disc Spider 25mm x 4 Exciter with 320mm Cable 40W 8 Ohm

Product ID : 28861912


Galleon Product ID 28861912
UPC / ISBN 848791001581
Shipping Weight 0.68 lbs
I think this is wrong?
Model DAEX25X4-4-S
Manufacturer Dayton Audio
Shipping Dimension 7.87 x 7.87 x 1.14 inches
I think this is wrong?
-
No price yet.
Price not yet available.

Pay with

Dayton Audio DAEX25X4-4 Bullfrog Vented Disc Spider Features

  • Pre-applied 3M™ VHB™ adhesive for quick, secure installation

  • Four 24 mm voice coils improves power handling to 40 watts RMS

  • Rare-earth neodymium motor and proprietary voice coils

  • Easy 8 ohm load, can be powered by most amplifiers


About Dayton Audio DAEX25X4-4 Bullfrog Vented Disc Spider

Quick Overview The unique DAEX25X4-4 exciter assembly from Dayton Audio uses an array of 4 separate exciters coupled together with a frame to actuate a larger area than conventional exciters, resulting in higher power handling and more output. Product Highlights Pre-applied 3M™ VHB™ adhesive for quick, secure installation Four 24mm voice coils improves power handling to 40 watts RMS Rare-earth neodymium motor and a proprietary voice coils Easy 8 ohm load, can be powered be most amplifiers Product Manuals / Spec Sheets / Downloads Dayton Audio DAEX25X4-4 Specification Sheet AddThis Sharing Buttons Share to FacebookFacebook Share to TwitterTwitter Share to MoreAddThis Product Description The Dayton Audio exciter assemblys unique design uses 4 25mm exciters coupled to a plastic frame to actuate a larger area with more force than conventional designs. This array of exciters is wired in a series-parallel configuration for an overall impedance of 8 ohms and power handling of up to 40 watts RMS. The DAEX25X4-4 exciter features the same ability to turn nearly any surface into a speaker, as other exciters and tactile transducers, only with a larger contact area and moving mass allowing for increased energy transfer. Perfect for use in walls, drop ceilings, or even cabinet doors. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Connection is made with 10" wire leads to keep installation and wiring as simple as possible. Dimensions: 7.5" W x 7.5" H x 0.75" D To understand more about exciter technology, here is a link to the Exciters Buyers Guide . Product Details Speaker Series Exciters Model Number DAEX25X4-4 List Price $39.99 Color Black Unit of Measure Each UPC 848791001581 Warranty - Parts 5 Years Warranty - Labor 5 Years Product Shipping Weight (lbs.) 0.25 Speaker Type Exciter Power Handling (RMS) 40 watts Power Handling (max) -- Continuous Program Power -- Impedance 8 ohms Sensitivity -- Frequency Response -- Voice Coil Diameter 4 x 25 mm Magnet Weight -- DC Resistance (Re) 7.3 ohms Voice Coil Inductance (Le) 0.29 mH Resonant Frequency (Fs) 285 Hz Mechanical Q (Qms) -- Electromagnetic Q (Qes) -- Total Q (Qts) -- Diaphragm Mass Inc. Airload (Mms) -- Moving Mass Of Diaphragm (Mmd) -- Mechanical Compliance of Suspension (Cms) -- Surface Area Of Cone (Sd) -- Volume of Displacement (Vd) -- BL Product (BL) -- Compliance Equivalent Volume (Vas) -- Maximum Linear Excursion (Xmax) -- Drivers Mechanical Losses (Rms) -- Entry / Exit Diameter -- Surround Material -- Voice Coil Wire Material -- Voice Coil Former -- Basket/Frame Material -- Magnet Material -- Overall Outside Diameter -- Overall Depth -- Baffle Cutout Diameter -- Mounting Hole Diameter -- Bolt Circle Diameter -- Product Weight --