2-Pin 8mm COB LED Strip to Wire Connector Unwired Clips Solderless Adapter Terminal Extension Connection for High Density LED Strip Lights 12V 24V (Pack of 10)

Pay with

2-Pin 8mm COB LED Strip to Wire Connector Unwired Features

• QUICK AND FLEXIBLE CONNECTION: Connect COB High Density Light strips to wire without stripping insulation, no soldering. The Alightings 2pin led light connectors are suitable for 8mm COB LED strip lights, One end connects 2-conductor 22 gauge extension cable and another end for cob led strip. The led tape light connectors can not work with 10mm led strips, 3528 rgb led strip, or 20 awg wire.

• FREE FROM THE LIMIT OF TERMINAL POSITION: Connect wire by yourself as need, use these COB 2pin led connectors with 22 gauge 2 conductor extension cable to get lighting exactly where you want it. No mater board to wire input or strip to strip jumper, extension distance and angle are no more problems to you.

• STRONG COMPATABILITY: The led strip connector compatible with 5v, 12v, 24v led light strips, work for IP20 8mm width 3528 2 Soldering Pads tape light. You only need to align the front side (led surface) of the light strip with the pins of the connector, and then buckle the transparent cover to achieve a stable and good connection. Suit for 22 awg 2 conductor wire, solid wire and multi-core wire.

• SOLID & EFFECTIVE CONNECTION: High quality tin plated copper core and PVC plastic wire cover ensure steady, safety and long-lasting connection, firmly bite through the led light strip, much stronger than old style lights connectors, The clear terminal is easier to pierce the wire, and the one-time success rate is higher.

• SOLDERLESS AND CONVENIENT: Simply slot the strip light and 22awg wire into connector and clamp the cover. Fits all 8mm width cob LED strips. Perfect for NON-WATERPROOF LED Tape Light DIY project.

About 2-Pin 8mm COB LED Strip To Wire Connector Unwired

These 2-pin strip to wire connectors are solution for 8mm COB LED strip lights connection and extension needs, DIY extention for whatever the cable length you want to connect. NOTE: 1. Make sure your LED light strip is 8mm width COB strip lights with 2 Soldering Pads. Not work for 12mm or 10mm width led light strips. Installation tips: Strip End: 1. Cut the strip straight perfectly, then fully open the clip. 2. Insert the light strip, align the 2 Soldering Pads of the light-emitting surface of the light with the 2-pins on the connector. Then press down the transparent cover. Wire End: 1.Cut the desired wire length you need and separated the 2 wires around connection part. 2. Insert wires into the connector guide slot, make sure that positive and negative on the strip light surface are corresponding to the wires. 3.Close the transparent cap with a pliers and  press down hard for several times. Ensure the metal joint pierces through the wire insulation as there are so many non-standard wires on the market! 4. reminder: no stripping of the wires.  Just be sure polarity nodes are matched up "+" to  "+" and "-" to "-". If you have any problem about installation, pls feel free to contact us. Package:  10pcs Strip to Wire Connectors (BL-TZ8XB-3)