Delavan PML3008-125ASAE PowerMAX 3" x 8" Hydraulic Tie-Rod Cylinder ASAE Certified

Pay with

Delavan PML3008-125ASAE PowerMAX 3" x 8" Hydraulic Features

• This ASAE Certified Tie-Rod Cylinder has 2,500 PSI Working Pressure and NPT Ports

• Bore: 3.0” - Stroke: 8” - Rod Diameter: 1.25” - Clevis Pin Diameter: 1” - Port Size: 1/2” FNPT

• Pin to Pin Center Retracted x Extended: 20-1/4” x 28-1/4”

• Max Rated PSI on Full Extension: Full PSI - Max Rated Column Load on Full Extension: 17,672 Lbs

• Warranty: 3 Years from date of purchase

About Delavan PML3008-125ASAE PowerMAX 3" X 8" Hydraulic

Features:• Chromed, polished and individually heat-treated shaft provides extended cylinder life• Built tough enough to stand up to the roughest conditions • Pins and retainers: high tensile steel, zinc plated to prevent corrosion, comes with cotter pin retainers• Ports: double ported NPTF for greater flexibility of assembly, unless otherwise stated, cylinders assembled with ports inline• Piston nut: heavy duty automation grade self locking piston nut holds piston in place under high cycle loading • Piston: ductile iron, precision machined providing a malleable bearing surface for extended cylinder life• Piston seal: 90 durometer O-ring with anti extrusion back up washers provide sealing under high load conditions• Tie-rods: high tensile steel to prevent failure under high pressure• Cylinder shaft: high strength, hard chrome plated shaft provides extended cylinder life in harsh applications• Tube: precision finished skive and burnished heavy wall steel tubing for extended seal and cylinder life• Rod seal: Premium Double Lip Polyurethane BS profile using a double lip design for leak-free performance throughout the pressure range and longer life expectancy• Rod cap and clevis cap: ductile iron comes with drilled oil passages, offering increased bearing surface for high shock and side load applications• Rod wiper: Polyurethane AN or D Style provides a tough/hard material to remove contaminants from shaft surface• Threaded shaft: (on ASAE cylinders) to accept optional mechanical stroke control (not applicable to 5 "bore cylinders) • Rod clevis: ductile iron able to withstand continuous high load without wear or fracture • All cylinders are 100% hydraulically tested up to 1.5 working pressure