StrataRise SELF-Levelling Deck & Floor Joist Supports - 30 Pack - Holds 650Kg (1430 lbs)

Pay with

StrataRise SELF-Levelling Deck & Floor Joist Features

• Self-Leveling - 0° to 5° slopes

• Standard height adjustment from 1.6" o 2.6" (41mm to 66mm), or higher with extenders

• Suitable for flooring and decking beam/joist levelling and support

• Very Quick and Easy installation for floors and decks

• Made from recycled polypropylene

About StrataRise SELF-Levelling Deck & Floor Joist

4166ML-SL-DF Self-Leveling Joist Support Pedestals for Decking & Flooring StrataRise Multi-Level 4166 Self-Leveling Pedestals will automatically compensate for slopes from 0° to 5° and are adjustable in height from 1.6" to 2.6" (41mm to 66mm). The height can be increased by using one or more of our QuickClick, bayonet fitting, extension pieces to achieve the required height range. The system can be extended to 20" (500mm) high, or more as required. The pedestals make it easy to achieve perfect leveling of beams or joists for flooring or decking support. The system is easy to use and aids quick and professional installation. Each support has a threaded self-leveling head section, with a fixing flange with screw slot for attaching to the joist or beam. The head is wide enough to accept joists up to 3" (75mm) wide. For wider joists we recommend placing alternate pedestals from opposite sides of the joist. An easy to operate threaded adjustment ring makes raising or lowering the head really quick and precise. Height adjustments can be made without removing the joists. A large 200mm (8”) base plate provides stable support on most surfaces. Scribe marks are provided on the underside to assist in trimming for use at sides and corners of installations. An optional 1/8" (3mm) thick anti-slip rubber base ring is available for use on membranes, etc. This effectively reduces transmitted noise where decks are mounted on balconies or roof areas, as well as for floors in multi-occupancy buildings. 4166ML self-levelling pedestal supports are tested to withstand loads of 1430lbs (650Kg) at their weakest setting, i.e. maximum height adjustment with just one thread engaged.