Ruffstuff 14 Bolt Disc Brake Conversion Kit (SRW) (With steel Braided)

Pay with

About Ruffstuff 14 Bolt Disc Brake Conversion Kit

NOTE: Fits 73-87 single rear wheel full float 14 bolt housings. Requires steel wheel minimum 15" with a maximum 4" back spacing and larger aluminum wheels Our disc brake conversion kit is the best conversion to eliminate the drum brakes on a 14 Bolt Rear Axle. The 14 bolt axle is common in Chevy / GM fullsize trucks from 1972 until today in the 3/4 ton and 1 ton range. Changing from drum brakes to disc brakes is easy, and all the parts you need to complete the conversion are included in this kit to get rid of those heavy drums brakes. These will only work on a 73'-87' axle the newer axles are hit and miss. Complete Kit Includes: 1 Pair 14 Bolt Disc Brake Brackets with Grade 8 Bolts 2 Weld on Brake Line Tabs 2 Brake Line Clips 2 Brake Calipers 2 Hydraulic Hoses with 10mm Banjo Bolt Fittings 4 New Brake Pads 2 New Rotors **NOTE* If longer studs are needed, usually dually studs are long enough or Dormin #610-301. Double check stud diameter, studs should drop freely into the rotor. DO NOT press studs into the rotor. If your hub has too large of studs you will need to drill the rotors to accept them. Be sure to have minimum 5/8" lug nut thread engagement ) *NOTE* This application will NOT FIT DUAL WHEELS *NOTE* Rotor installs onto the backside of the hub! *NOTE* Don't forget to re-bleed your brakes once you've installed your new conversion kit. *NOTE* A Proportioning Valve is recommended, this will allow you to fine tune your front/rear stopping power bias. Your front axle should always do about 70% of the work.