8 Ft. High x 4 Ft. Wide Banjo Drape Panel (For Pipe and Drape Displays and Backdrops) - Navy Blue

Pay with

About 8 Ft. High X 4 Ft. Wide Banjo Drape Panel

This lighter weight fabric has an open weave pattern with shiny (almost sparkling) specks where the threads are thickest. Commonly used for pipe and drape displays in convention centers. Quantity 1 = 1 drape. The drape is not sewn with pleats; it is sewn flat and can be gathered by hand on a drapery rod using one of the 4 inch pole pockets (sewn on both the top and bottom of the drape). A minimum of 4 drapes are recommended per 10 foot wide span. Fabric has a usable selvedge on both sides. Fabric blocks approximately 60% of light. This estimate is approximate for use under normal conditions, and with adequate gathering (bunching). Many factors can affect the opacity, including the amount of lighting, the amount of gathering (bunching), spacing from a wall, and the overall brightness of the lighting in a room. Using the drape near a wall makes it more opaque than if it's used in front of a window with sunlight shining through. In situations with a lot of lighting, you can help make it more opaque by adding an extra drape panel or two. A minimum of 4 drapes for every 10 foot wide span is recommended. Care Instructions: Machine wash like colors on cold, using a gentle cycle. If needed, use only a mild liquid detergent applied to the water prior to placing drape in the machine -- never put concentrated detergent directly into contact with the fabric as it may alter the color. Can be machine dried (air only setting), and ironed (cool setting). NEVER EXPOSE THE DRAPE TO TEMPERATURES ABOVE 140°F DURING ANY PORTION OF LAUNDERING. Doing so can significantly shrink and/or permanently wrinkle the fabric. Please note: the colors shown in the listing are for reference only and may not be exact as different browsers, monitors, and settings will show colors differently. Free sample swatches are available upon request prior to ordering.