All Categories
Friendly Tips: 1. Please note this diving flashlight DOES NOT come with any battery or battery charger. 2. Can be put into 3.7V 18650 battery, this flashlight will work perfectly. 3. Fully charge the battery before use. If you are not going to use it for a long time, remove the battery. 4. After each dive, be sure to clean the flashlight with fresh water, otherwise the diving flashlight will corrode due to the high salinity of the sea water. 5. If the battery level is low, it will automatically switch to low brightness mode. If the battery voltage is too low, it will automatically suspend. General operations By pressing the button on the head the first time, you will get the brightest light. Pressing the button on the head the second time, you will get a dim light. Pressing the button on the head a third time will get a strobe light. Pressing the button on the head a fourth time will turn off the flashlight. Updated version of CREE XM-L2 LED Underwater is super shiny and more practical. The maximum power can reach 1200 lumens. With a life of up to 100,000 hours or more, there is no need to consider replacing the cap for life. Replace the O-rings There are 2 o-rings to improve the waterproof performance of the diving flashlight. Lubricate the o-rings after each dive and replace them when damaged. Doing so will keep the flashlight properly sealed against water. Package: 1 x LED Dive Flashlight 1 x lanyard 2 x o-rings