8 inch Dock and Boat Cleat for Securing Dock Ropes and Anchor Lines (4 Pack), Excellent Durability with Rugged Black Nylon Construction, Perfect for Lighter-weight Applications & Docking Small Vessels

Pay with

About 8 Inch Dock And Boat Cleat For Securing Dock Ropes

Product Specifications: Dimensions: 1 x 8 x 1.5 inches Fastener Size: #14 fastener. To calculate the size of cleats you need on your boat use the calculation below: ✔ Cleat length from tip to tip should be 1" for every 1/16" of line diameter and dock lines should be 1/8" of diameter for every 9 feet of boat length. ✔ So a 36 foot boat, will need ½ inch diameter rope. ✔ For a ½ inch diameter rope you would need, at a minimum, the cleat to be 8 inches long from tip to tip. ✔ If you're unsure, or need to tie down a variety of vessels, it is best to be on the safe side to go a size or two larger. ✔ Always follow the boat owners manual for proper mooring instructions CAUTION: Failure to follow these warnings and instructions can cause death or personal injury. Do not use this product for climbing, overhead lifting, towing, athletic equipment, playground equipment, situations where personal safety or valuable property could be endangered or in support or restraint of human or animal weight in any manner. Chair or wire rope strength rating should be equal or less than the strength of the product strength rating. Exceeding the capacity of any components could result in failure and harm to property or persons.