SuperInk 1 Set (1 Sensor,1 Alarm,1 Remote Controller) Remote Wireless PIR Motion Detector Alert Multi-Function Sensing Door Bell Gate Entry Welcome Chime Doorbell Burglar Security Alarm

Pay with

About SuperInk 1 Set

Parameters 1.Battery Lifespan:5-7 months (based on 30 times per day) 2.Working Frequency:433.92MHz 3.Working Temperature:10 degree below zero to 60 degree above zero 4.Operating Humidity:below 80 percent 5.Storage Temperature:20 degree below zero to 70 degree above zero 6.Remote Controller: 1x12V 27A(not included) 7.Rmote Controller: Approx. 60x40x20mm/ 2.36x1.57x0.79inch 8.Remote Left Button: Turn ON/ Switch Mode 9.Remote Right Button: Turn OFF 10.Remote Middle Button: V+/V-, music button Features: 1.Can maximum learning 32 infrared, vibration, magnetics etc wireless sensor accessories and 8 remote controllers. 2.Remote transmission range up to 280M/918ft in the open space. 3.Install the transmitter in the ceiling or aisle of the entrance where customers and intruder go back and forth, installation by screws will be more firm than double-sided tap which required tidy and smooth surface. Batteries and Power 1.3*AAA alkaline batteries for PIR transmitter, 3*AA for Receiver, please note the negative and positive. 2.Alkaline batteries are recommonded, other types will shorten standby time and lower the alarm volume, Micro USB is alternative for power supply;battery supply will be automatically cut off if AC power, and can be standby power supply if power off. 3.You will hear short """"DU"""" and see LED colorful lights flashing after loading the batteries for receiver, load the batteries, turn on the transmitter, the blue LED indicator will be on for 5 seconds. Low Batteries Indication 1.Infrared curtain LED flashes once every 3 seconds 2.Receiver:if you hear the low battery indication sounds when it is in application, please replace the battery in time, or all functions cannot be realized. 3.LED indicator gets darker or wireless range get shorter