Lifetime Electrolux 137221600 Washer Drain Pump Kit by Seentech - Compatible for KENMORE Frigidaire Washer - Replace 137108100 AP5684706 134051200 134740500 134740800 137108100 137151800

Pay with

Lifetime Electrolux 137221600 Washer Drain Pump Kit Features

• ✅ FITS TOP NAME BRANDS: This kit is a direct replacement for the drain pump on your Whirlpool Kenmore Maytag washing machine drain pump 137221600.

• ✅ REPLACEMENT PART No: 137221600 TJ137108100 131724000 134051200 134051200 134740500 134740800 137108100 137151800 137151800KITK 137151900 137151900KITK ER137108100.

• ✅PRODUCT SPECIFICATIONS - The pump removes water from the washer during the drain portion of the cycle. The product specs of this washer drain pump are: Frequency: 60Hz, Watts: 85W and Voltage: 120V.

• ✅ EASY DIY FIX: This repair takes 30 to 60 minutes to complete on your own, but it still beats the cost and hassle of a repair call. You’ll just need a Phillips screwdriver, pliers, towel, needle nose pliers, and small flathead screwdriver.

• ✅ MONEY-BACK GUARANTEE - For any reason you're not completely satisfied, you can ask for a replacement or full refund, no questions asked

About Lifetime Electrolux 137221600 Washer Drain Pump Kit

Specification: The pump motor is what your washer uses to remove the water from the tub. This part is the pump and motor assembly which includes the red flapper to prevent drain back flow. This part works with the following brands: Frigidaire, Electrolux, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse. Works with the following models: Electrolux: PTF7012MW1, SATF7000FS0, SATF7000FS1, STF7000FS0, etc Kenmore: 41744052400, 41744052401, 41744052500, 41744082400, 41744082500, 41744092500, 41744152400, 41744152401, 41744152500, 41744252500, 41744252501, 41748102700, 41748102701, 41748106700, 41748112700, 41748112701, 41748116700... Gibson: CWS445RGS1, DWS445RHS0, DWS445RHS1, GES831AS1, GES831AS2, GES831CS0, GLSG62RFW0, GLSG62RHS0, etc Frigidaire: 970L48022A0, ATF6000ES0, ATF6000ES1, ATF6000FS0, ATF6000FS1, ATF6000FS2, ATF6500FG0, ATF6500GG0, ATF6500GG1, ATF6500GS0, ATF6700FE0, ATF6700FE1, ATF6700FE2, ATF6700FS... Instruction when replacement: The tools needed for this repair project is a putty knife, Phillips and flat blade screw driver, 1/4 inch nut driver, and needle nose pliers. Remember to unplug washing mechine from power source as a safety precaution. Refer to the manual provided by the manufacturer for further installation instructions. 1. Disconnect all electrical & hydraulically net work for washing machine. 2. Empty all contents and also any inner water. 3. Disassemble the defective drain pump from impeller/filter/machine shaft include the electrical & Hydraulically connection. 4. Install with carefully at the same place the new Drain pump motor with also new gasket, the eventual bracket and protection for water. 5. Shut the screws to avoid clasp excessively so that not ruin the threads. 6.Repair the electrical & hydraulic connection for the drain pump, by verify and supervise the correct working of the machine, executing a washing-drying cycle