AA-BOND FDA22 FDA Medical Grade Epoxy Adhesive, Two Part, Room Temp Cure, 5gm kit

Pay with

About AA-BOND FDA22 FDA Medical Grade Epoxy Adhesive, Two

RODUCT DESCRIPTION: AA- BOND FDA22 is a high viscosity epoxy resin system specifically developed for bonding and coating applications in accordance with Title 21, U.S. Code of Federal Regulations, Food and Drug Administration (FDA) Chapter 1, Sub Part B, Sections 175.105 and 175.300. AA- BOND FDA22 is two-parts tan adhesive is easily mixed, used and cured at room temperature for bonding, laminating and repair applications by manufacturers of food preparation, processing and packaging equipment, and by manufacturers of catheters, hearing aids, dental products and other biomedical instruments and devices. AA-BOND FDA22 is an effective electrical insulator, and it provides low permeability to gases and vapors, and good resistance to water, weather, galvanic action, to petroleum solvents, lubricants and fuels, to mild acids and alkalis, and too many other organic and inorganic compounds. GENERAL PROPERTIES Appearance Light tan Cure Type Heat cure or Room temperature Benefits High viscosity Easily mixed Electrical insulator Low permeability Good resistance Mix Ratio by weight 100:40 / Resin:Hardener Operating Temperature -60 to 140 °C Substrates Most metals, ceramic, glass and plastics Typical Application Bonding, laminating and repair applications by manufacturers of food preparation, processing and packaging equipment, and by manufacturers of catheters, hearing aids, dental products and other biomedical instruments and devices UNCURED PROPERTIES: Viscosity At 25 °C 27,000 Thixotropic Index 1.2 Specific Gravity, mixed 1.44 Reactive solids contents, % 100 Pot Life 3 hours CURE SCHEDULE: 1-4 hours At 65°C 24-36 hours At 25°C CURED PROPERTIES: Hardness, Shore D 78 CTE, Linear 26.1 µin/in-°F Dielectric strength kv/in 420 GENERAL INFORMATION: For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).