All Categories
The OV7670 is a low-cost image sensor and Digital Signal Processor (DSP) that can operate at a maximum of 30fps with a pixel resolution of 640×480 (VGA) equivalent to 0.3 Megapixels. The captured image can be pre-processed by the DSP before sending it out. This preprocessing can be configured via the Serial Camera Control Bus (SCCB). It's very useful for Electronic lovers, you can use the camera with microcontroller development boards such as STM32, ESP8266, or Arduino, as well as single-board computer like the Raspberry Pi or BeagleBoard. Please note that the board in this listing includes the OV7670 camera module as well as the AL422B FIFO chip. Features: Breakout board 30×30mm for OV7670 camera module; includes lens mount and 3.6mm Focal Length lens Operating voltage of 3.3VDC Operating temperature of 0~50°C VGA resolution (640×480), can be downsampled to QVGA (320×240) and QQVGA (160×120) I2C communication with data transfer rates of 1mbps (128KBps) Pixel area of 3.6μm×3.6μm Viewing angle of 25 degrees Maximum frame rate of 30fps We have written useful guides for getting you started with the OV7670 Camera Module:https://www.instructables.com/id/OV7670-With-FIFO-Very-Simple-Framecapture-With-/