We specialize in hard to find items
(4)
AIMELIAE 1PC AM FM Radio Kit Parts CF210SP Suite For Ham Electronic Lover Assemble DIY
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About AIMELIAE 1PC AM FM Radio Kit Parts CF210SP Suite
Instruction: Align the IC in the correct position and solder opposing pins. Then solder each successive pin taking care not to short out adjacent pins. Mount the hardware – the headphone jack, the variable capacitor, the volume switch and the band switch. Mount the two copper air-coiled inductors and LED Bettery case：Keep the terminals loose on your bench and solder a red wire to the positive and black wire to the negative solder a pair of yellow wires to the positive and negative of the speaker. Now, the screws need to be sorted and the dials installed. three long tapping screws (pointed end) two short tapping screws (pointed end) two identical machine screws (flat end) one slightly different machine screw make the final connections and assemble the unit. First, slide the battery terminals into place – positive is the top terminal on the front case, negative is the lower terminal. Tack-solder the negative wire to GB-, and positive wire to GB+. Next, solder the speaker wires with both yellow wires going to one SP terminal respectively. The AM rod antenna connections can be made by looping out the enamelled wire (over the top of the PCB is best) and tack soldering the ends to AM terminals. The final connection is the FM antenna connection. Note: Different people may have different approach to assemble it, you can also search on google or YouTube for more sharing and detail, hope you have fun with this Kit.
