We specialize in hard to find items
All Categories
TESmart 16×1 HDMI Switch 16 in 1 Out 4K HDMI Switcher with IR Remote 4K@60hz 16 Port HDMI Switch Box HDCP 2.2,Auto Switch,19-inch Rack-Ears Mount,LAN Port Control,Auto Scan Switch
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
TESmart 16×1 HDMI Switch 16 in 1 Out 4K HDMI Features
-
【HDMI Switch 4K 60Hz Resolution】Supports resolutions up to 3840 * 2160 @ 60Hz, HDCP2.2 compliant.
-
【16 Port Switch Timing Switching】Supports auto-scan function to switch video automatically among computers in preset Intervals sequentially by OSD menu driven(0-3600 seconds)
-
【4 Switch Modes】Supports front buttons, wireless IR remote control（with IR extender cable）, RS232 serial commands or IP commands to control 16x1 HDMI switcher.
-
【Built-in Intelligent EDID Emulator】Keep display information accurate thanks to the intelligent EDID emulators in all the ports.
-
【Plug and Play】Use the 16x1 HDMI switch to disconnect and reconnect devices as needed without interruption (i.e. hot swap)
-
【Auto detect and switch function】TESmart 16 port HDMI Switch can automatically detect a new connected device and switch to this input source.
-
【Standard 1U 19-inch Rack Mount】It is perfect for standard 1U height and 19-inch Cabinet/Rack Design if you maybe use Cabinet/Rack. With 2 Pcs Rack Ears perfect use for Standard 1U 19-inch Cabinet/Rack.
About TESmart 16×1 HDMI Switch 16 In 1 Out 4K HDMI
16x1 HDMI Switch 4K @ 60Hz 4: 4: 4The 16-port HDMI switch HSW1601A1U enables up to 16 Ultra HD sources to be routed to an Ultra HD display. Supports resolutions up to 4K @ 60Hz. Supports multiple control methods, front buttons, IR signals, RS232 serial commands or IP commands. With EDID emulators in each input port, you can ensure that PCs always have the correct display information and prevent display settings from being changed when the input ports are switched.FeaturesWith EDID emulators in each input port, you always keep input devices with correct display information.Support hot plug, connect or disconnect devices with the HDMI switch at any time and without switching off devices.Support of automatic switching for monitoring computers in a certain time intervalSupports front buttons, IR signals, RS232 serial commands or IP commands to control HDMI switches.Supports resolutions up to 3840 * 2160 @ 60HzAutomatic input detection and switchingHDCP2.2 compliantPacking list1 * 16x1 HDMI switch1 * DC 12V 2A power supply1 * IR remote control(CR2025 Battery not included)1 * IR receiver cable1 * 3 pin connector (for RS232)2 * rack ears1 * Quick start guide
