Premium Coax RF CATV Signal Distribution Amplifier with High 40dB Gain for Commercial Use

Pay with

About Premium Coax RF CATV Signal Distribution Amplifier

This TV signal booster can be used for full range of TV bands for both UHF/VHF and CATV systems when you have long cable TV runs and multiple splitters used in the setup. This commercial-grade RF CATV distribution amplifier helps boost the RF TV signal for analog/digital cable TV, CCTV, SMATV, antenna or all other RF modulated TV system with amplification up to 40 dB gain. It provides clean, crisp video for large homes or office buildings with long cable runs and many TV outlets where amplifier cascading is required. Featured with adjustable attenuation to reduce over-driving and adjustable tilt compensation to allow large systems to be properly balanced. High Gain 40dB Boost This unit is featured with high 40 dB gain for RF input signals to compensate the RF TV signal loss and attenuation after long cable transmission. Users can easily extend the cable TV signal for another 1700FT or 500m if RF TV source signals have fair 70 to 75dB strength to start with. Also a great solution for fixing the problems of noise, snowy picture, interference and weakness after distribution for CATV, Digital TV and CCTV systems. Easy Gain Control From 0~20dB The variable gain dial on this amplifier provides an adjustable attenuation control for reducing the possibility of over driving and get best performance. This gain control is very handy for installer to obtain the optimum signal level balancing in installation. Proper gain level can greatly enhance the picture quality with minimum noise. Easy Tilt Control From 0~20dB When installer has a large RF TV system to run or multi-transmission by one coaxial cable, this Slope Control function helps installers balance all cable TV signals to be transmitted at same output amplitude for optimal installation. -20dB Input/Output Testing Port A testing port with -20dB input/output is provided for easy trouble shooting.