for SMA Software Defined Radio RTL-SDR Blog V3 RTL2832U 1PPM TCXO HF BiasT for SMA Software Defined Radio R820T2 H3

Pay with

for SMA Software Defined Radio RTL-SDR Blog V3 Features

• 【RTL-SDR Blog V3 RTL2832U 1PPM TCXO HF BiasT for SMA Software Defined Radio R820T2 H3】

• 【Wide Frequency Range】Tuning range is 500 kHz to 1.7 GHz, with instantaneous bandwidth up to 3.2 MHz. In HF mode, it operates in direct sampling mode, enabling tuning down to 500 kHz, unlike basic RTL-SDR models.

• 【Improved Performance】This model features various improvements such as the R820T2 tuner, 1PPM TCXO, and component tolerances. It also has enhanced front-end circuitry and added chokes, bypass capacitors, and power line ferrites to reduce noise and spurs.

• 【 for SMA F Connector and Aluminum Housing】Equipped with an for SMA F connector for better connectivity. The aluminum shielded housing includes thermal pads for efficient cooling, ensuring optimal L-band performance.

• 【Supports External Devices】The software-activatable bias tee circuit allows for easy connection to external devices like LNAs and active antennas. It also has breakout pads on the PCB for further customization options.

• 【Compatibility and Easy Installation】Compatible with Win dows, MacOS, for LINUX, and And roid systems, including Pi. Installation is simple, and it requires a USB 2.0 port (compatible with most USB 3.0 ports) for reliable performance.

About For SMA Software Defined Radio RTL-SDR Blog V3

Features: RTL- Blog V3 R820T2 1PPM TCXO HF BiasT for SMA Software Defined Radio Application areas: RTL is for many applications including general radio scanning, air traffic control, public safety radio, ADSB, AIS, ACARS, VDL2, trunked radio, P25/DMR digital voice, TETRA, POCSAG, weather balloons, for APRS, NOAA APT or for METEOR M2 weather satellite, Outernet, Inmarsat, , GSM, Milsatcom, radio astronomy, for meteor scatter monitoring, DAB, or as a low cost panadapter with traditional amateur radio. Improve This RTL unit has several improvements over G M and other brands, including: R820T2 tuner Improve passive component tolerances 1 PPM Temperature Compensated Oscillator (TCXO) HF mode via built-in direct sampling (tunable to 500 kHz, unlike basic RTL- which can only be tuned to 24 MHz) for SMA F connector Aluminum shielded housing with thermal for PADS for passive cooling for improved L-band performance Software activates 4.5v bias tee circuit Improved PCB design reduces noise and spurs USB noise choke, more bypass capacitors and built-in ferrite reduce PC noise Improved ESD protection (additional ESD diodes and additional ESD discharge paths) Improved front-end circuitry designed for broadband use (other models still use circuitry designed only for DVB-T) There are multiple breakout for PADS on the PCB for advanced users This is an RTL- software defined radio receiver with RTL2832U ADC chip, R820T2 tuner, 1PPM TCXO, for SMA F connector and aluminum housing with passive cooling. Tuning range is 500 kHz to 1.7 GHz, with instantaneous bandwidth up to 3.2 MHz (maximum stable bandwidth is 2.4 MHz, or 3.2 MHz if your application can tolerate USB drops). (HF operates in direct sampling mode - only available on models V.3 and above). as a computer-based radio scanner with free software such as #, HD, -Radio, Linrad, GQRX or Touch on And roid. Works with Win dows, MacOS, for LINUX, And roid and even embedded for LINUX computers like Rasp berry Pi. This model has several key improvements compared to other models. It uses an improved R820T2 tuner with 1PPM TCXO (2 PPM initial offset, 1 PPM temperature drift), improved component tolerances, and for SMA F connectors. It also features software-activatable bias circuitry for powering external devices such as LNAs and active antennas. It also has high frequency reception capabilities. Most standard RTL- dongles are tunable down to 24 MHz. This model has hardware that unlocks "direct sampling mode" and allows tuning down to 500 kHz. There is a built-in 25 MHz low-pass filter to optimize this mode. Various other improvements to other models were also applied. For example, chokes were added to the USB lines and additional bypass capacitors and power line ferrites were added to reduce internal and PC noise, the PCB was redesigned to significantly reduce noise performance, ESD protection was improved, front-end The circuitry has been optimized for broadband use (other models are still optimized for DVB-T frequencies), the LDO has been upgraded, and multiple breakout for PADS have been added for advanced users. This device requires USB 2.0 (works with most USB 3.0 ports, but we can't guarantee it will work with all ports, so make sure your PC has a native USB 2.0 port, just in case). Installation on Win dows is simple, Goo gle for the RTL- blog quick start guide (sorry, links not allowed on e Bay). Can be tuned from 500 kHz to 1.7 GHz and has an instantaneous bandwidth up to 3.2 MHz (2.4 MHz stable). (In direct sampling mode, performance is reduced for high frequency reception below 24 MHz). Please note that the RTL- dongle is only available for RX. Package Included: 1 x for SMA software defined radio