Rembam DT01931 Projector Replacement Compatible Lamp with Housing for Hitachi CP-X5550 CP-X5555 CP-WX5500 CP-WX5505 CP-WU5500 CP-WU5505

Product ID : 56892454

---

  Share   Tweet

share more:

---

Galleon Product ID 56892454

UPC / ISBN 794471875167

Shipping Weight 0.79 lbs
I think this is wrong?

Model

Manufacturer Rembam

Shipping Dimension 6.42 x 5.28 x 5.24 inches
I think this is wrong?

See more product information!

-

₱ 5,633

Price Tracker

+ ₱ 543
International Shipping

via AIR

Get it between 2025-06-03 to 2025-06-10. Additional 3 business days for provincial shipping.

---

BUY NOW!

*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown

---

• Electrical items MAY be 110 volts.
• 7 Day Return Policy
• All products are genuine and original
• Cash On Delivery/Cash Upon Pickup Available

Pay with

Rembam DT01931 Projector Replacement Compatible Features

• ☀Rembam all items are 100% New(New and Improved Technology).And will be packaged in good condition before dispatch

• ☀Lifetime:Premium quality,high brightness,long Life replacement projector lamp,lamp lifetime approximately 2000 hours

• ☀Install:is easy and quick for your installation to make sure your device is back in action

• ☀Guarantee:Take strict test before delivery.Excellent return service and friendly customer service.Any other problems with the projector lamp,please contact us.

• ☀Compatible projector:for Hitachi CP-X5550 Hitachi CP-X5555 Hitachi CP-WX5500 Hitachi CP-WX5505 Hitachi CP-WU5500 Hitachi CP-WU5505

About Rembam DT01931 Projector Replacement Compatible

Rembam Information: Rembam has own factory and many experienced workers.Every lamp will be take strict quality test before leaving factory.So you don't need to doubt the quality. Specifications: Part number: DT01931 Application:Business/Education/Home/School Compatible:for CP-X5550 CP-X5555 CP-WX5500 CP-WX5505 CP-WU5500 CP-WU5505 Package: 1 bulb with housing 1 Instructions sheet Installation: 1.Turn off the projector and unplug the power cord. 2.Let the projector cool for at least an hour. The lamp is extremely hot immediately after use. 3.Loosen the lamp cover screw. Then slide the lamp cover off. 4.Loosen the two screws holding the lamp in place. 5.Hold the lamp as shown and pull it straight out. 6.Gently insert the new lamp. Then tighten its screws. 7.Replace the lamp cover, then tighten its screw. Notes: 1.To avoid burns,allow the projector to cool for at least 60 minutes before replacing the lamp. 2.We provide excellent refund service with no any contidition with 12 hours feedback.If you have any questions,please contact us.We will try our best to sole your problem as soon as possible.