We specialize in hard to find items
All Categories
SparkFun GPS-RTK2 Board - ZED-F9P (Qwiic) High-Precision Breakout No Soldering Required Breadboardable Contains a Rechargeable Backup Battery Allowing a Warm-Start decreasing time-to-First-fix
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
SparkFun GPS-RTK2 Board - ZED-F9P Features
-
Dual operations: Capable of 10mm, three-dimensional accuracy; Both rover and base station operations
-
Multiple configuration options: Geofencing; Variable I2C address; Variable update rates; even the high precision RTK solution can be increased to 20Hz
-
Five communications ports which are all active simultaneously:USB-C (which enumerates as a COM port); UART1 (with 3.3V TTL): UART2 for RTCM reception (with 3.3V TTL); I2C (via the two Qwiic connnectors or broken out pins); SPI
-
Compatible with Arduino library: Read latitude, longitude, heading and speed over I2C without the need for constant serial polling; Time to First Fix: 25s (cold), 2s (hot)
-
Note: GPS board only; Does not come with cables or microcontroller
About SparkFun GPS-RTK2 Board - ZED-F9P
With GPS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dialing in the accuracy on their GPS modules to to just millimeters, and that's why we had to put it on this board! The SparkFun GPS-RTK2 raises the bar for high-precision GPS and is the latest in a line of powerful RTK boards featuring the ZED-F9P module from u-blox. The ZED-F9P is a top-of-the-line module for high accuracy GNSS and GPS location solutions including RTK that is capable of 10mm, three-dimensional accuracy. With this board, you will be able to know where your (or any object's) X, Y, and Z location is within roughly the width of your fingernail! The ZED-F9P is unique in that it is capable of both rover and base station operations. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard. We've even included a rechargable backup battery to keep the latest module configuration and satellite data available for up to two weeks. This battery helps 'warm-start' the module decreasing the time-to-first-fix dramatically. This module features a survey-in mode allowing the module to become a base station and produce RTCM 3.x correction data. The number of configuration options of the ZED-F9P is incredible! Geofencing, variable I2C address, variable update rates, even the high precision RTK solution can be increased to 20Hz. The GPS-RTK2 even has five communications ports which are all active simultaneously: USB-C (which enumerates as a COM port), UART1 (with 3.3V TTL), UART2 for RTCM reception (with 3.3V TTL), I2C (via the two Qwiic connnectors or broken out pins), and SPI.Voltage: 5V or 3.3V all logic is 3.3VCurrent: ~35mA (varies with constellations and tracking state)
