All Categories
Get it between 2025-06-03 to 2025-06-10. Additional 3 business days for provincial shipping.
BN-880 is suitable for Open source flight controller, not for flight control with SCM
Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L
Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it
DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
When you use it for Raspberry Pi, there is no driver needed but you need to install software
Description:Power Supply:DC Voltage 2.8V~6.0V,Typical:3.3V or 5.0V Consumption:Capture 50mA@5V Receiving Format: GPS, GLONASS,Galileo,BeiDou,QZSS and SBAS Receiving Channel:72 Searching Channel Receiving Sensitivity:Trace -167dBm , Capture-148dBm Positioning Time:Cold Start: avg26s , Warm Start: avg25s, Hot Start: avg3s Level Positioning Precision: 2m At Open Wind Output Frequency:1Hz-10Hz,Default 1Hz Speed Precision: 0.1 m/s (Without Aid) Acceleration Precision :0.1 m/s (Without Aid) Dynamic Characteristics:Max Height:18000m, Max Speed:5153m/s,Max Acceleration:4G UART Interface:UART Port:TXDA and RXDA Support Rate:4800bps to 115200bps,Default 38400dps Working Temperature:-40℃-+85℃ Storage Temperature:-40℃-+85℃ Size:28mm x 28mm x 10mm The Module's Pins:SDA,GND,TX,RX,VCC,SCL Features: GPS Module,Dual Module Compass With electronic compass IC HMC5883L 1.25mm spacing between the 6pins patch seat Note: Can not use for flight control with SCM, but it is suitable for Open source flight controller. GPS Program Set up documents and instructions:Please click here BN-880 GPS Configuration files Package Included: 1x BN-880 GPS Module 1x 15cm Cable