NetcamViewer Monitor Universal Network Video Decoder for IP-Cameras

Pay with

NetcamViewer Monitor Universal Network Video Features

• View any compatible IP-camera on your Monitor

• Check your manual for compatibility with ONVIF or RTSP

• Supports ONVIF certified cameras, displays any RTSP- MJPEG- JPG(JPEG)-stream

• Configurable Camera Sequence, HDMI & Composite Video Output

About NetcamViewer Monitor Universal Network Video

Spotmonitor at the entrance of shopsPicture-in-Picture or full-screen on a standard TV (depending on the capabilities of the TV)Display on an analogue monitor (requires a cable set supplied separately)Specifications Display on a fullscreen of an H264 RTSP stream at 720p/1080p 20fps, 1080p depending on brand and model of the camera and available network capacity.Display on a full screen of (M)JPG at a lower frame rate, depending on the brand of camera / resolution / quality.Display of multiple cameras in a sequence on a full screen. Display duration is fully configurable.Multiview, display of up to 9 cameras simultaneously on the display.Audio output, provided the camera supports this.HDMI output signal using the supplied cable.Analogue output PAL/NTSC (with optional cable set).Support for more than 600 brands of camera. Free support for the integration of new brands/models.Support for ONVIF certified cameras.Manual expert-configuration for the display of any RTSP-, MJPEG-, or JPG (JPEG)-stream.Manual expert-configuration for additional camera related API.The start-up time of the camera may vary depending on the configuration, functionality and hardware of the camera.Complete configuration using a browser. Support for mobile devices for simple configuration.Multi-lingual interface (English, Dutch, German).Hardware is based on Raspberry PI 3 Model B.Powered via a micro-USB 5V or supplied mains power supply 110-230V, 50-60Hz.Dimensions: 95 x 63 x 25 mm.