Monport Fireproof 60W (16" x 24") Manual Focus CO2 Laser Engraver & Cutter with 9L CW-3000 Industrial Water Chiller for 40W-80W CO2 Laser Engraver

Pay with

Monport Fireproof 60W (16" x 24") Manual Focus CO2 Features

• 【Fireproof Viewing Window】This viewing window is made from special fire-resistant polyester with iron frames. The melting point of this polyester ranges from 432° to 488° and the ignition temperature of it is over 1000°, which can dramatically decrease the possibility of fire accidents caused by the heat of laser burning the materials.

• 【Enclosed Aeronautical Aluminum Rail】Equipped with X and Y stepper motors, this rail features efficient power transmission with high precision. The enclosed rail is designed to avoid smoke and debris and prolong the service time of rail units.

• 【Ruida Digital Controller】Whether your chosen software is LightBurn, RDworks, AutoCAD, or CorelDRAW, this Ruida digital controller can support the given platform. The Ruida Controller with a digital display can control the laser head, start or stop projects, adjust laser power and speed settings and so on.

• 【Built-in Air Assist】A built-in air assist system guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping engravings more precise.

• 【3-ways to Connect with PC End】Two USB ports provide options including flash drive connectivity and a USB-to-USB PC connection. In addition, one ethernet port is also available for connection.

• 【Red Dot Guidance】The red dot shows the laser head position, marks the working path and frames the project sizes, assisting you with more convenience and guidance.

• 【Efficient Cooling Fan】Monport CW3000 water chiller has high heat dissipation. High-speed fans inside quickly radiate the heat away from your laser tube and cool down your machine to ambient temperature.

• 【Multiple Safety Guarantee】This professional chiller has multiple warning protection mechanisms such as water flow, high/low temperature alarm, compressor delay protection, and compressor over-current protection.

About Monport Fireproof 60W (16" X 24") Manual Focus CO2

Lighting The light belt under the lid gives point illumination for precise Mechanics Linear System— Custom extruded aluminum linear rails Motion— Equipped with stepper X, Y axis, plus mechanical limit switches Cooling— easy-to-setup water pump and hoses Air Assist— Internal air assist with no external compress or required Ventilation— On-board exhaust fan, as well as an exhaust hose so you can vent the fumes to the outdoors Standard 110V, AC power connection 4-pinport connection for rotary axis devices Temperature Recommended Operating Temperature: 60 -104 °F (16 °C-40 °C) Attention: the CO2 water temperature must be maintained at 60-70 °F (16-21°C) Package Lists Laser Engraver Machine *1 Water Pump *1 Storage Tank *1 Ethernet to Ethernet Cable *1 USB Type-A to Type-A Cable *1 Venting Exhaust Duct (4 ft. max. length) *1 Water Hoses *2 USB Drive with Software *1 Hex Wrenches *10 Double-sided Tape *1 Power Cord *2 Hose Clamp *1 Accessory Bag *1 Keys *2 Silicone Sealant *1 Instruction Manual *1 Model Number: CW-3000 Water Chiller Compressor Power: 0.6 HP (0.45kW) Input Power: 110 V / 60Hz Max Flow: 2.6 gal/min. (10L/min) Max Lift: 32.8 ft. (10 m) Current: 0.9A Product dimension: 22.8” x 14.2” x 18.5” ( 58 x 36 x 47 cm ) Total weight: 25.4 lb ( 11.5 kg )