Plexus MA300 Black (IT410) All Purpose High Strength 5-Minute MMA Adhesive Kit (50ml/1.7oz w/Hand Plunger)

Pay with

Plexus MA300 Black (IT410) All Purpose High Features

• Kit includes 1 Cartridge, 1 Small Hand Plunger, and two mixing options (1 Reusable Mixing Sheet and 1 Mixing Nozzle). Perfect for one-time light-duty jobs

• fast setting 3-6 minute work life; 500psi at 12 minutes, and 1000psi at 15 minutes

• Black MMA ashesive for thermoplastics, metals, and composites

• bonds to dirty/less clean surfaces, and Excellent Tolerance to Off-Ratio Mixing

• This is a Regulated Dangerouse Goods Item, Air/Expedited Shipments include DG Shipment Fee

About Plexus MA300 Black (IT410) All Purpose High

This is a kit that includes on cartridge, one mixing nozzle one reusable mixing sheet, and one small hand plunger for light-duty dispensing. Plexus MA300 Black (IT410) is a two-part 1:1 mix ratio, Black-color methacrylate adhesive Kit with included small hand plunger, reusable mixing sheet, and mixing nozzle. Perfect for single-use or occasional / light-duty dispensing needs. It is designed for structural bonding of thermoplastic, metal, and composite assemblies. Combined at a 1:1 ratio, MA300 Black (IT410) has a working time of 3 to 6 minutes and reaches approximately 500 psi in 12 minutes and 1000 psi in 15 minutes at 74°F (23°C). This product offers a combination of high strength and stiffness as well as the ability to bond a wide range of materials. Plexus MA300 Black (IT410) replaces an older popular Devcon formula Plastic Welder (14320). It is the same formula inside, but is now branded under the ITW Plexus name. Characteristics Room Temperature Cure Working Time 3 – 6 minutes Fixture Time 12 – 15 minutes Operating Temperature -67°F – 250°F (-55°C – 121°C) Gap Filling 0.03 in. – 0.125 in. (0.75 mm – 3.2 mm) Mixed Density 8.10 lbs/gal (0.97 g/cc) Flash Point 51°F (11°C) Chemical Resistance Excellent resistance to: Hydrocarbons, Acids and Bases (pH 3-10), Salt Solutions Susceptible to: Polar Solvents, Strong Acids and Bases Please Note: These cartridges are designed to work best with a 50ml cartridge Dispenser. However, If you do not have or want this type of gun, then this package may be right for you. It includes a manual hand plunger that can be used to dispense the epoxy, and two extrusion options 1) a mixing nozzle and 2) a reusable mixing sheet. The two parts may prove hard to push out, if so then take the mixing nozzle off and extrude the two parts onto the mixing sheet and manually mix with a stick or the mixing nozzle manually.