We specialize in hard to find items
(2)
Concrete Acid Stain | Case Quantity Buys (Malay Tan)
Share Tweet
About Concrete Acid Stain | Case Quantity Buys
Step 1: Prepare the floor with the Concrete DNA Diamond Pad with Resins. This is the 30 grit prep pad. Run the pad with plenty of water under a low speed floor buffer with our Super Blue product diluted at a minimum of 9 parts water. Squeegee the water and remove from the floor with a wet/dry squeegee vac Ensure the floor is clean from dust and footprints. Let the floor dry completely Step 2: Spray the floor with the stain and ensure 100% coverage. Let the stain dry on the floor. When it is dry the stain is done reacting. Thoroughly flush the residue from the stain off the floor with water and clean the floor free from dust. Tip: If you run your finger over the floor and your finger picks up residue continue flushing until residue is gone Let the floor dry completely overnight Step 3: Apply Ez Seal with a 3/8" nap roller Apply at least 2 thin coats Step 4: Allow Ez Seal to dry for at least 12 hours before applying Ez-Glo Apply at least 1 coat of Ez-Glo by using a microfiber mop
