Dreffco (The Original Complete HC-36 NG Fire Pit Kit in A Single Kit! SS Burner, Non Whistle Flex Lines, Ball Valves, Igniter & Installation Flange Kit! (36" NG HC)

Pay with

About Dreffco

Our stainless steel Pan-Ring burner kits come complete with everything you need to start your outdoor fire pit project. We start with 304 stainless steel so your burner will remain trouble free in the outdoors. The burner tubes are inserted into the adjoining tube then welded for unrestricted gas flow. All of our flame holes are precession drilled not punched so there are no tabs pushed inside restricting gas flow. By using our stainless steel Burner Pan-Rings with our stainless steel burner rings mounted on a stainless steel pan you have a corrosive resistant protective solid flat surface to work with. Best of all you can pour our fire glass crystals over the top of the pan-ring and it will not sift its way down into your lava rock. Our NEW DELUXE connection kit has been assembled using matching components to assure the best performance i.e. 2 Non-Whistle flex lines, high-flow keyed main shut off ball valve and another 1/4-turn shut off valve to connect to your incoming gas line. With this second shut off you can connect and disconnect your burner system without having to shut your gas off at the source. All this adds up to exactly what you are looking for; the highest possible flames with the most complete and easiest kit to install your burner. Please note, your incoming gas line size needs to be matched to the size of your burner. On average you will need a 1/2 inch line for 18, 22, 30 inch pan-rings. The 36, 40 inch pans will most likely require a 3/4 inch gas line. These are general guidelines and not meant to be used as suggested gas line sizes; you will need to consult your installer for the exact size of line needed. We always recommend that all gas products be installed and serviced by professionals that have been certified by the NFI or WETT. The installer must conform to any and all State and/or local codes.